Airbag-Steuergerät mit der Teilenummer 95910A7350

What is the function of the airbag control unit 95910A7350?

The airbag control unit 95910A7350, also known as the SRS module, is the central control unit for the entire occupant protection system in Kia Forte models. It processes signals from impact sensors and controls the activation of airbags, seatbelt pretensioners, and shut-off valves to ensure the safety of vehicle occupants in the event of a crash.

As the brain of the Supplemental Restraint System (SRS), this module continuously monitors and evaluates data from crash sensors distributed throughout the vehicle. In the event of a collision, the control unit determines within milliseconds which restraint systems need to be deployed.

The control encompasses not only front, side, and head airbags but also pyrotechnic seatbelt pretensioners that firmly secure occupants in their seats. Additionally, it can activate systems such as the fuel shut-off valve to minimize the risk of fire after an accident.

Why does the airbag control unit 95910A7350 fail?

The most common cause of failure for control unit 95910A7350 is the storage of crash data following an accident, which locks the device. Other defects include communication failures due to internal hardware malfunctions, damaged components such as chips or capacitors, and damage caused by moisture or water ingress.

After an accident in which airbags or seatbelt pretensioners have been deployed, the control unit stores so‑called crash data. This is a safety feature designed to prevent reuse without professional inspection, effectively locking the unit. Such a lock can only be released through specialized repair.

Another frequent reason for failure is an internal hardware defect. This often renders the control unit inaccessible via the OBD interface. The causes typically involve faulty electronic components like processors, memory chips (EEPROM), or capacitors on the circuit board.

External factors such as moisture or water exposure can also lead to corrosion on the circuit board, resulting in total failure. Similar and compatible part numbers like 95910A7300 and 95910B0100 often exhibit identical fault patterns.

How do you recognize a defect in control unit 95910A7350?

A defective airbag control unit 95910A7350 usually manifests as a permanently illuminated or flashing SRS warning light on the dashboard. Additionally, communication with the control unit via an OBD diagnostic tool may become impossible, preventing the reading or clearing of fault codes—indicating an internal malfunction.

The most obvious sign is the activated SRS indicator light. It fails to turn off after starting the vehicle, signaling a fault in the airbag system that requires immediate inspection at a workshop.

If a workshop cannot establish a connection to the airbag control unit through the OBD diagnostic port, this is a clear indication of a severe internal fault. In this state, the fault memory cannot be read or cleared.

Other symptoms may include specific error codes pointing directly to the control unit itself, or messages indicating that airbags and seatbelt pretensioners have been triggered—even though they have not. A defective control unit poses a significant safety risk, as airbags may fail to deploy in the event of a crash.

In which models is control unit 95910A7350 installed?

The airbag control unit with part number 95910A7350 is primarily used in Kia vehicles. It affects mainly the Kia Forte TD generation (2008–2013) as well as the newer BD generation (from 2018 onward). Similar control units are also found in related Kia models from these model years.

At Airbag24, we repair part number 95910A7350 for the following Kia models:

Kia Forte TD (model years 2008–2013)

Kia Forte BD (model years 2018 and later)

Compatibility often extends to vehicles equipped with related part numbers 95910A7300 or 95910B0100. A precise verification of the part number on the removed unit is essential for successful repair.

How is control unit 95910A7350 professionally repaired?

At Airbag24, control unit 95910A7350 undergoes a meticulous electronic diagnosis. Repair typically involves erasing stored crash data (resetting) and replacing any defective electronic components. Following successful restoration and a final functional test, the unit is fully operational again.

After submission to Airbag24, repairs follow a proven procedure. First, the control unit undergoes an initial inspection, during which the fault memory is read and the exact defect is localized at the component level.

The core of the repair consists of two main steps, depending on the nature of the fault. For stored crash data, the control unit’s memory is professionally reset. In cases of hardware defects, faulty components such as microchips, capacitors, or sensors on the circuit board are replaced with new, high-quality parts.

Subsequently, the repaired control unit undergoes a comprehensive functional test on a test bench, ensuring that all functions have been restored and that the device meets safety requirements. We provide a 12-month warranty on every repair.

Is it worth repairing control unit 95910A7350?

Yes, repairing control unit 95910A7350 is an economically and technically sensible alternative to purchasing a new one. Compared to a new part, which often costs between 500 and 1,000 euros, you save significantly. Additionally, there’s no need for time-consuming re-coding, and you receive a 12-month warranty.

The biggest advantage is the substantial cost savings—up to 70% compared to a new manufacturer‑supplied control unit. Repairing is a budget‑friendly solution to restore your vehicle’s full safety.

Since the original vehicle control unit is refurbished, all vehicle‑specific data and coding remain intact. After repair, the unit can be easily reinstalled via plug-and-play, without requiring expensive reprogramming at a workshop.

A professional repair restores the airbag system to full functionality and ensures occupant safety. With a 12-month warranty on the work performed, this repair offers a reliable and secure solution.

What shipping options does Airbag24 offer?

For your control unit repair, you can either send the package to Airbag24 yourself at no charge or arrange a paid UPS pickup. For return shipping, you have access to free standard UPS shipping as well as faster express options. Cash on delivery and self‑pickup are also available.

For outbound shipping, you can securely pack the removed control unit and send it to us at your own expense, or bring it in person. Alternatively, you can conveniently book a paid UPS pickup from a location of your choice.

After repair, we offer several return‑shipping options:

- Free standard UPS shipping

- UPS express shipping

- Standard UPS shipping with cash on delivery

- Express UPS shipping with cash on delivery

- On‑site self‑pickup

Please always include the completed order form with your package to ensure swift and smooth processing.