Airbag control unit with part number 95910CV200

What is the function of the airbag control unit 95910CV200?

The airbag control unit with part number 95910CV200 is the central control module for the occupant protection system in the Kia EV6 (CV). Manufactured by Autoliv, it processes data from crash sensors and decides within milliseconds whether to deploy airbags and seatbelt pretensioners, ensuring passenger safety in the event of a collision.

This control unit, installed as an original equipment manufacturer (OEM) part in the Kia EV6 from model year 2021 onward, is specifically designed for the electric rear-wheel-drive variant with 168 kW. It continuously monitors all components of the restraint system, from front and side impact sensors to airbags and seatbelt pretensioners.

The ECU’s task is to analyze the severity and direction of an impact. Based on this data, it selectively activates the necessary safety devices to provide optimal protection for occupants.

Why does the airbag control unit 95910CV200 fail?

The most common cause of failure for the 95910CV200 control unit is stored crash data following an accident, which permanently locks the system. Other defects include internal electronic faults on the circuit board, issues with sensors, or problems with the internal power supply that can lead to complete system failure.

A key issue is the storage of crash data. Even minor accidents—such as rear-end damage without airbag deployment—can result in the device logging a “crash event” in its memory. This triggers a legally mandated lockout that can only be lifted through professional repair.

In addition, purely electronic failures may occur, involving defective components such as capacitors, processors, or memory chips. Such internal faults often manifest as specific diagnostic trouble codes in the vehicle’s fault memory.

The related part number 95910CV100, also an OEM component from Kia, is known to exhibit similar failure patterns and can be repaired in the same manner.

How do you recognize a defect in the 95910CV200?

A defect in the 95910CV200 control unit primarily manifests as the airbag warning light remaining constantly illuminated on the dashboard. Communication with the control unit via a diagnostic tool (OBD) is often impossible as well. Additional symptoms may include a malfunctioning clock or other onboard electronics.

The clearest indication is the persistent activation of the airbag warning light. It fails to turn off after starting the vehicle, signaling a critical fault in the safety system that requires immediate attention.

In the workshop, it is frequently observed that the control unit no longer responds. Diagnostic tools cannot establish a connection, complicating troubleshooting and pointing directly to an internal fault within the control module.

Rarer but documented cases include accompanying symptoms such as a non-functioning clock display or complete system failure when heated. The fault memory may contain codes like “internal error” or issues with side impact sensors.

In which models is the 95910CV200 installed?

The airbag control unit with part number 95910CV200 is used exclusively in vehicles manufactured by Kia. It is the original control unit for the all-electric Kia EV6 of the CV series, produced from model year 2021 onward.

At Airbag24, we repair the 95910CV200 part number for the following specific vehicle model:

Kia EV6 (CV series), model years 2021 and newer, particularly the rear-wheel-drive variant with 168 kW (approximately 228 hp) output.

How does the repair of the 95910CV200 proceed?

Professional repair of the 95910CV200 at Airbag24 involves precise analysis, deletion of stored crash data, and restoration of faulty electronic components. Following repair, the control unit undergoes a functional test to ensure full operability.

After removal from the vehicle, the control unit is sent to Airbag24. Here, technicians perform an initial inspection to verify reported faults and examine the unit for additional defects.

The core of the repair process is erasing stored crash data and fully resetting the system. If electronic components such as circuit boards, capacitors, or sensors are damaged, they are expertly repaired or replaced.

Upon completion of work, calibration and a comprehensive final test are conducted. The repaired control unit can then be reinstalled in the vehicle and is immediately ready for use. We offer a 12-month warranty on all repairs.

Is repairing the 95910CV200 worthwhile?

Yes, repairing the 95910CV200 is the most cost-effective solution. Compared to a new part, which often costs over €1,000, repair offers significant savings. Additionally, there’s no need for expensive re‑coding, as the vehicle‑specific configuration is preserved.

The price of a new part frequently exceeds €1,000. Even used control units are sold for €300–€400, with no guarantee they’re free of defects or contain hidden crash data. Repair is by far the safer and more affordable alternative.

Another key advantage: a repaired control unit retains its original vehicle coding. It can be easily reinstalled and operates without requiring additional programming or adaptation. By contrast, a new or used control unit often necessitates time‑consuming and costly coding at a specialized workshop.

With a 12‑month warranty on the completed repair, this option provides not only financial benefits but also technical reliability and peace of mind.

What shipping options are available?

To send your control unit to Airbag24, you can either ship it yourself or arrange a convenient UPS pickup at your preferred location. For returns, we offer free standard UPS shipping as well as optional express delivery, both with the option of cash-on-delivery.

Outbound shipping: You have choices. Safely pack your removed control unit and send it to us, or use our UPS pickup service directly from your home or workshop.

Return shipping: Once the repair is complete, we’ll promptly ship your control unit back. Standard UPS shipping is free; if you need faster delivery, choose UPS Express.

Both standard and express shipping are also available with cash-on-delivery, should you prefer to pay upon receipt. Alternatively, you can pick up your repaired control unit directly from our facility.