Airbag control unit with part number 95910D4250

What is the function of the airbag control unit 95910D4250?

The airbag control unit with part number 95910D4250 is an original Kia OEM component specifically installed in the Kia K5 TF (model years 2010–2015). It serves as the central control unit for the entire occupant protection system, processing data from crash sensors and deploying airbags and seatbelt pretensioners in the event of a collision.

As the brain of the passive safety system, this control unit continuously monitors and interprets signals from acceleration and yaw rate sensors. Within milliseconds, it determines whether a crash has occurred and which restraint systems need to be activated.

The components it controls include not only front and side airbags but also seatbelt pretensioners and, where applicable, knee airbags. Proper functionality is therefore critical for passenger safety and for passing the vehicle inspection.

Why does the control unit 95910D4250 fail?

The most common cause of failure for the 95910D4250 control unit is the storage of crash data after an accident, which results in the unit being locked out. Other typical defects include electronic faults in internal components such as capacitors or microcontrollers, as well as damage caused by moisture ingress leading to corrosion.

After an airbag deployment, a so‑called “crash record” is permanently stored in the control unit’s memory. This record locks the unit, preventing reuse without specialized repair. Clearing the data using standard diagnostic tools is no longer possible in this state.

In addition, purely electronic failures can occur—such as cold solder joints, faulty capacitors, or a malfunctioning microcontroller responsible for primary data processing. These hardware issues often lead to communication problems or internal error messages, even in the absence of a crash.

Similar fault patterns are also known in related control units from Kia and Hyundai, such as part numbers 95910-2E400 or 95910-1W100. Moisture ingress, for example through body panel leaks, can likewise cause irreparable damage to the circuit board.

How do you recognize a defect in the 95910D4250?

A defective 95910D4250 airbag control unit primarily manifests as a constantly illuminated airbag warning light on the instrument cluster. Often, communication with the control unit via diagnostic equipment becomes impossible, and the fault memory contains non‑erasable entries related to crash data or internal errors.

The clearest indication is the airbag warning lamp that fails to turn off after starting the engine. This signals a critical fault in the restraint system that requires immediate attention, as the airbags may no longer deploy reliably in the event of a crash.

Another clear symptom is the control unit’s lack of response to diagnostic requests. When a workshop attempts to read the fault memory via the OBD interface, the unit is either not recognized or a communication error is reported.

In some cases, specific error messages appear on the display, such as “Airbags defective” or warnings regarding the fuel shut‑off valve. Additionally, the airbag light flashing immediately after ignition can indicate an internal fault within the control unit.

In which vehicles is the 95910D4250 control unit installed?

The airbag control unit with part number 95910D4250 is primarily intended for the Kia K5 TF model series (model years 2010–2015), also known as the Kia Optima in Europe. Similar defects and control units can also be found in other Kia and Hyundai models, such as the Sorento, Tucson, or i10.

Compatibility is mainly limited to this specific model and time frame. At Airbag24, we professionally repair the 95910D4250 control unit for the following models:

Kia K5 TF (2010–2015)

Although the part number is specific, many Kia and Hyundai control units share a similar technical platform. Therefore, the described fault patterns may also occur in vehicles like the Hyundai Tucson or Kia Sorento, albeit under different part numbers.

How does the repair of the 95910D4250 proceed at Airbag24?

Professional repair at Airbag24 involves a detailed analysis of the electronics to pinpoint the exact cause of the fault. Defective components on the circuit board are then replaced, stored crash data is reset, and final tests confirm full functionality. A 12‑month warranty is provided on all repairs performed.

Upon receipt of the control unit at Airbag24, our technicians perform a comprehensive incoming inspection. During this process, we determine whether the fault is caused by stored crash data, a hardware defect, or a combination of both.

The core of the repair lies in addressing the root cause at the component level. This includes professionally desoldering and replacing defective parts such as microcontrollers or capacitors, as well as expertly resetting the internal memory data.

Finally, the control unit is tested in a controlled environment to verify the proper functioning of all systems. Following a successful test, the unit is shipped back to you. Every repair comes with a 12-month warranty.

What shipping options are available at Airbag24?

You can either send your control unit to Airbag24 yourself at no cost, or arrange for UPS to pick it up from your preferred location. For the return shipment, free UPS Standard options are available, along with faster UPS Express services—both payable by cash on delivery if desired. Personal pickup is also an option.

For the outbound shipment, you have two choices: either ship the removed control unit to us yourself, or use UPS’s convenient pickup service, which collects the package directly from your home or workshop.

The return shipment after a successful repair is provided free of charge via standard UPS shipping. If you require expedited delivery, you can opt for UPS Express shipping.

Both standard and express shipping options are also available as cash-on-delivery. Of course, you may also choose to pick up your repaired control unit in person at our facility.