Airbag control unit with part number 95910GI110

What is the function of the airbag control unit 95910GI110?

The airbag control unit with part number 95910GI110 is the central control module for the passive safety system in the Hyundai Ioniq 6 CE. It continuously analyzes data from acceleration and pressure sensors to precisely deploy airbags and seatbelt pretensioners within milliseconds in the event of a crash, thereby protecting occupants.

As a genuine Hyundai OEM component, the control unit 95910GI110 is perfectly matched to the vehicle architecture of the Ioniq 6 (CE series). It serves as the brain of the entire restraint system, communicating with all relevant sensors and actuators to ensure that every component functions correctly in an emergency.

The unit also stores all pertinent system-related data, including fault codes and, in the event of a crash, so‑called crash data. This information is crucial for diagnosing faults and reconstructing accidents.

Why does the control unit 95910GI110 fail?

The most common reason for requiring repair of the control unit 95910GI110 is the storage of crash data after an accident. Other causes include internal electronic malfunctions that manifest as specific error codes, or communication failures that prevent diagnosis. Water damage can also lead to complete failure.

Following a crash—even one involving low impact energy—the control unit locks internally to prevent unintended re‑deployment. This “crash lock” renders the component unusable, even though the hardware itself is often undamaged. A professional repair can lift this lock and erase the crash data.

Another frequent cause of failure is internal defects on the circuit board. These may involve faulty components, cold solder joints, or issues with the internal memory. Such problems often result in persistent or intermittent warning messages on the instrument cluster.

For the Hyundai Ioniq 6 CE, in addition to part number 95910GI110, the alternative OEM part number P22466131 is also relevant. Both control units can be affected by the same defects and require identical repair procedures.

How do you recognize a defect in the 95910GI110?

A defect in the airbag control unit 95910GI110 primarily manifests as a permanently illuminated or flashing airbag warning light on the dashboard. Additionally, during diagnostics via the OBD port, the control unit may become unreachable or display specific internal error codes—for example, related to side‑impact sensors—despite the sensors themselves being intact.

The clearest indication of a problem is the persistently lit airbag warning light. It alerts the driver that the safety system is not fully operational and may fail to deploy correctly in the event of a crash.

In the workshop, a defect often becomes apparent when communication with the diagnostic tool is no longer possible. The control unit fails to respond to requests, making accurate fault analysis difficult or impossible.

Sometimes communication remains possible, but internal, non‑erasable error codes appear. Examples include “internal control unit error” or specific errors referencing sensors (such as side‑impact sensor faults), even though the sensors themselves are functioning properly. This points to an issue within the control unit itself.

In which vehicles is the control unit 95910GI110 installed?

The airbag control units with part numbers 95910GI110 and the alternative OEM number P22466131 are specifically designed for the Hyundai Ioniq 6 of the CE series. At Airbag24, we offer expert repairs tailored to these exact vehicle models, restoring full functionality to the safety system.

At Airbag24, professional repair of the control unit 95910GI110 is performed for the following model:

Hyundai: Ioniq 6 (CE series, model years 2022–2025)

Repairs are available for both the primary part number 95910GI110 and the alternative number P22466131 for this specific model.

How does the repair of the 95910GI110 proceed at Airbag24?

Upon receipt of the removed control unit at Airbag24, a comprehensive analysis is conducted to identify the fault. Subsequently, stored crash data is erased, defective electronic components are replaced, and any consequential damage caused by moisture is addressed. A final functional test ensures the quality of the repair.

The repair process at Airbag24 is standardized to guarantee the highest quality and reliability. First, an incoming inspection verifies the customer‑reported symptoms and pinpoints the exact cause of the issue.

The core of the repair process lies in eliminating the defect. This includes properly erasing crash data, repairing the electronics at the component level, or resolving communication errors, thereby restoring the unit to its pre‑incident condition.

If a repair is technically impossible or economically impractical, certified, remanufactured replacement control units are available. All repair work performed comes with a 12‑month warranty.

What shipping options are available for repairs?

To send your control unit to Airbag24, you can either ship it yourself free of charge or conveniently arrange for UPS pickup at your preferred location. Returns are also handled flexibly via UPS, with the choice of free standard shipping or faster express delivery, each option including cash-on-delivery.

Outbound Shipping: You can choose to send the defective control unit to our workshop yourself or use the convenient UPS pickup service, which collects the package directly from your address at the agreed time.

Return Shipping: After successful repair, the control unit will be promptly returned to you. Several options are available: free UPS standard shipping, faster UPS express shipping, and both methods with the option of cash-on-delivery.

Self‑pickup at our workshop is also possible upon prior arrangement. This allows you to select the most suitable and fastest option to get your vehicle back on the road.