Airbag control unit with part number 95910T1000

What does the airbag control unit 95910T1000 do?

The airbag control unit 95910T1000 forms the central control unit of the restraint system (SRS) in Genesis vehicles. It reads the signals from the crash sensors and decides in an accident which airbags and seatbelt pretensioners fire.

This decision is made by the unit within milliseconds. During operation, it also checks the entire system and reports faults via the airbag warning light.

After an accident, the control unit stores crash data and locks itself.

Why does the control unit 95910T1000 fail?

Most often the cause is crash data stored after an accident, even if no airbag was triggered. A normal diagnostic tool cannot erase this data. Airbag24 removes it during the repair.

Other causes can arise without an accident. Electronic components age, and solder joints can become cold. Moisture and corrosion act on the contacts of the plug connections.

Voltage spikes, for example from a weak battery or jump-starting, put additional strain on the electronics.

How can you tell that the 95910T1000 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently and so indicates a fault. Often a fault message also appears in the instrument cluster, and the diagnostic tool cannot find the control unit.

A fault memory that cannot be cleared is another sign. In this condition, airbags and seatbelt pretensioners may not be able to trigger in an emergency. The warning light is therefore a clear sign that you should act.

Which vehicles is the 95910T1000 fitted in?

The 95910T1000 is fitted in these vehicles: Genesis G80 RG3 (2021-2023) and RG3 Facelift (from 2024). By comparing the details on the unit, you can find out whether your car is the one meant.

Here are the vehicles that are known to us for this control unit:

• Genesis G80 RG3 (2021-2023)
• Genesis G80 RG3 Facelift (from 2024)

Before you remove anything, compare the part number on the label with this page. This only confirms that you have the correct unit in front of you. Please also have the fault memory read out, because only then does it show whether the control unit is defective or whether a plug or cable is responsible.

For the same vehicles, we also repair control units with the part numbers 95910T1010, 95910T1100.

How does the repair of the 95910T1000 work?

For the repair of the 95910T1000, first read out the fault memory and attach the log. Then disconnect the battery and only then remove the control unit. Online, create the repair order and send in the well-packed unit.

Airbag24 checks the unit on the test bench, repairs defective components and erases the stored crash data. A function test follows, and your own unit returns to you.

Processing at Airbag24 usually takes 3–4 working days. This time refers only to checking, repairing and testing.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910T1000 get to Airbag24?

You send the control unit 95910T1000 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends the unit back to you by UPS.

Put the printed repair order in the parcel and pack the unit shock-proof.