Airbag control unit with part number 95910T1010

What does the airbag control unit 95910T1010 do?

The airbag control unit 95910T1010 evaluates the restraint system (SRS) in vehicles from Genesis. It compares the signals of the crash sensors and, in an impact, selects the appropriate airbags and seatbelt pretensioners within milliseconds. After a crash, it locks itself.

The control unit runs continuously in the background and checks every component of the system. It stores faults in memory and shows them via the airbag warning light in the instrument cluster.

Why does the control unit 95910T1010 fail?

The most common cause of the control unit 95910T1010 is stored crash data after an accident, even if no airbag has fired. A normal diagnostic tool does not erase this data; Airbag24 removes it during the repair. Other causes are aged electronics, cold solder joints, moisture and corrosion on plugs, and voltage spikes.

Stored crash data is a special case, because it arises from the accident itself and not from a technical defect. It nonetheless stays in the unit until the repair erases it.

The other causes build up slowly: components age, plug contacts corrode, and voltage spikes such as those from a weak battery or jump-starting strain the electronics.

How can you tell that the 95910T1010 is defective?

A defect in the 95910T1010 shows up as the airbag warning light in the instrument cluster lighting up permanently or intermittently, and as error messages in the display. Connection problems with the diagnostic tool or a fault memory that cannot be cleared also belong to this.

The airbag warning light is the clearest signal. When it lights up, the system is reporting a fault in the restraint system. In an emergency, airbags and seatbelt pretensioners may then fail to trigger, so have the cause checked promptly.

Connection problems with the diagnostic tool are also among the signs, because the control unit then does not respond.

Which vehicles is the 95910T1010 fitted in?

The control unit 95910T1010 is fitted in these vehicles: Genesis G80 RG3 (2021-2023) and RG3 Facelift (from 2024).

The models the control unit fits are listed below:

• Genesis G80 RG3 (2021-2023)
• Genesis G80 RG3 Facelift (from 2024)

First compare the number on the label of the unit with this page. This only establishes that it is the correct unit. Then have the fault memory read out, because this result decides whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910T1000, 95910T1100.

How does the repair of the 95910T1010 work?

Have the fault memory read out and attach the log before you disconnect the battery and remove the control unit 95910T1010. Then create a repair order online and send in the well-packed unit.

Airbag24 checks the control unit on the test bench and replaces defective components. The workshop also erases stored crash data and carries out a function test. Afterwards, your own unit is returned to you.

Processing at Airbag24 generally takes 3–4 working days. This period refers only to checking, repairing and testing.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910T1010 get to Airbag24?

You send the control unit 95910T1010 as a parcel to Airbag24, or alternatively book a UPS collection for an extra charge. After the repair, Airbag24 sends the unit back by UPS.

Enclose the printed repair order with the unit before packing it shock-proof.