Airbag control unit with part number 95910T6100

What does the airbag control unit 95910T6100 do?

The airbag control unit 95910T6100 coordinates the restraint system (SRS) in Genesis vehicles. It reads the signals from the crash sensors, determines within milliseconds in a crash which airbags and seatbelt pretensioners trigger, and monitors the system without interruption. After an accident it stores crash data and locks itself.

If the unit detects a fault, it passes this on via the airbag warning light in the instrument cluster. Monitoring also continues during normal driving.

Why does the control unit 95910T6100 fail?

On the 95910T6100, the most common cause is found in crash data stored in memory after an accident, even if no airbag has deployed; a normal diagnostic tool cannot erase it. In addition there are ageing electronic components, cold solder joints, moisture and corrosion on plug connections, and voltage spikes, for example with a weak battery or after jump-starting.

Crash data is stored content and not a sign of wear. Its presence remains invisible from the outside at first.

The other causes act over a longer period. Solder joints become brittle, and moisture penetrates plug connections.

How can you tell that the 95910T6100 is defective?

Signs are an airbag warning light that lights up permanently or intermittently, and a fault message in the instrument cluster. In addition, the diagnostic tool does not connect to the 95910T6100, and the fault memory cannot be cleared.

• Airbag warning light in the instrument cluster, permanently or intermittently
• Fault message in the instrument cluster
• Diagnostic tool without connection to the control unit
• Fault memory cannot be cleared

In this case have the system checked promptly. The light shows the finding; the exact cause is determined only by evaluating the fault memory.

Which vehicles is the 95910T6100 fitted in?

The control unit 95910T6100 is fitted in these vehicles: Genesis GV80 JX1 (2021-2023) and JX1 Facelift (from 2024).

This overview shows the vehicles known for this part number:

• Genesis GV80 JX1 (2021-2023)
• Genesis GV80 JX1 Facelift (from 2024)

You can do the label comparison yourself: match the number on the unit with this page. That only confirms that you have the right unit. Whether it is faulty is revealed only by the fault memory, which you have read out beforehand, and it also shows whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910T6200.

How does the repair of the 95910T6100 work?

First have the fault memory read out and enclose the log, then disconnect the battery. Only after that do you remove the control unit, and then create a repair order online and send in the well-packed 95910T6100. At Airbag24, checking, repairing and testing usually take 3–4 working days.

After receipt, Airbag24 examines the control unit, replaces defective components, deletes the crash data and tests the function. The unit itself then returns to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910T6100 get to Airbag24?

You send the 95910T6100 as a parcel to Airbag24, or book a UPS collection for an extra charge. After the repair, Airbag24 sends the control unit back by UPS. The printed repair order goes into the parcel, and you pack the unit shock-proof.

A stable packaging that absorbs impacts is what matters most for transport.