Airbag control unit with part number 95963026

What is the function of the airbag control unit 95963026?

The airbag control unit with part number 95963026 is the central control module for the occupant safety system (SRS) in the Daewoo Tico KL (model years 1991–2001). It processes data from crash sensors and, within milliseconds, determines whether and which restraint systems—such as airbags and seatbelt pretensioners—should be deployed.

As the “brain” of the safety system, this component continuously monitors all connected components, including frontal and side impact sensors, seat occupancy detection, and the ignition circuits of individual airbags and seatbelt pretensioners. In the event of a collision, it analyzes the force and direction of the impact to ensure precise and safe deployment.

Any malfunction in this system—whether in a sensor or in the control unit itself—is immediately indicated by the illumination of the SRS or airbag warning light on the instrument panel, alerting the driver that occupant protection is no longer fully guaranteed.

Why does control unit 95963026 fail?

The most common cause of failure for control unit 95963026 is the storage of crash data after an accident, which results in an intentional lockout. Other reasons include internal hardware defects caused by aging, moisture ingress, or voltage surges, often manifesting as specific, non‑erasable fault codes.

Even after a minor impact, the control unit stores so‑called crash data. For safety reasons, this data permanently locks the unit, preventing reuse without professional diagnostics. This lock cannot be removed simply by clearing the fault memory at a workshop.

The component can also fail without any accident. Common causes are electronic parts on the circuit board that deteriorate due to aging, moisture intrusion, or fluctuations in the vehicle’s electrical system, leading to internal errors that prevent proper operation of the airbag system.

Typical fault codes indicating such internal defects include B1111 (control unit defective), 65535 (internal error), 93F9, or 65/3/550. These errors point to issues with the device’s memory or processor and require specialized electronic repair.

How do you recognize a defect in the airbag control unit?

A defect in control unit 95963026 primarily manifests as a permanently illuminated airbag warning light on the dashboard. Additionally, during diagnostics, the unit may become unresponsive, or specific, non‑erasable fault codes such as B1111 or 65535 may appear, signaling an internal malfunction.

The most obvious symptom is the persistently lit SRS or airbag warning light. In some cases, the light may only illuminate temporarily—for example, for 30 seconds after starting the vehicle—before extinguishing again, despite the presence of a fault.

Another critical sign is the lack of communication between the diagnostic tool and the control unit. If a workshop attempts to read the fault memory, they receive no response from the unit, effectively rendering it invisible to the vehicle’s electrical system.

When fault codes indicating an internal defect are detected—such as B1111 or 65535—this provides clear evidence of a problem within the control unit itself. Such errors cannot be reset using standard diagnostic tools and require chip‑level repair.

In which vehicles is part number 95963026 installed?

The airbag control unit with part number 95963026 is specifically designed for the Daewoo Tico. Airbag24 offers professional, reliable repair services for this control unit, which was used in the corresponding model years of this vehicle.

At Airbag24, we repair the airbag control unit with part number 95963026 for the following specific vehicle model:

Daewoo Tico KL (model years 1991–2001)

What are the advantages of repair over purchasing a new unit?

Repairing control unit 95963026 is significantly more cost‑effective than buying a new one, which often costs over €400. A repaired original part also eliminates the need for time‑consuming coding and, once installed and any residual faults cleared, is immediately ready for use, backed by a warranty.

The financial benefit is substantial. While a new unit entails high expenses, repair saves often more than 70%, protecting your budget without compromising safety or functionality.

An additional key advantage is that the repaired control unit remains precisely matched to your vehicle. A new unit typically requires extensive coding and adaptation to the vehicle’s specific configuration, incurring extra workshop costs. Repair, by contrast, is a plug‑and‑play solution.

Moreover, repair is a fast and sustainable solution. Rather than waiting weeks for a new part, the refurbished control unit is quickly available again. Each repair comes with a 12-month warranty.

How does the repair process work at Airbag24?

The process begins with removing the defective control unit and sending it to Airbag24. Our technicians perform a thorough analysis, erase crash data, fix any hardware defects on the circuit board, and finally conduct a comprehensive functional test. We provide a 12-month warranty on every repair.

First, the control unit must be professionally removed from the vehicle. In the Daewoo Tico KL, it is typically located in the footwell beneath the rear seat or in the center console. The removed unit is then securely packaged and shipped to us.

Upon arrival at Airbag24, the control unit undergoes an initial inspection. At the heart of the repair is electronically restoring the unit to its factory settings. This involves not only erasing crash data but also professionally addressing hardware issues such as faulty capacitors or processors.

After successful refurbishment, each unit undergoes a rigorous quality assurance and testing procedure to ensure full functionality. It is then returned to you and can be reinstalled in your vehicle. Following installation, any residual fault codes in the vehicle may need to be cleared.

What shipping options are available?

For a hassle-free process, you can either send the control unit yourself or arrange for a UPS pickup at your location. For returns, we offer free standard UPS shipping as well as faster express options. Cash-on-delivery and self-collection are also available.

For outbound shipments, you have two choices: either ship the package yourself or use our convenient UPS pickup service, which collects the package directly from your preferred address.

After repair, we typically return the control unit to you via free standard UPS shipping, which usually takes 1–3 business days.

If you need it sooner, you can opt for UPS Express shipping (1–2 business days). Both standard and express shipping can be arranged with cash-on-delivery if desired. Alternatively, you can pick up your repaired control unit in person at our facility.