Airbag control unit with part number 96 030 364-95080

What is the function of the airbag control unit 96 030 364-95080?

The airbag control unit 96 030 364-95080 is the central control module for the passive safety system (SRS) in the Daewoo Nubira J150. Its primary task is to monitor all relevant sensors, evaluate crash signals, and precisely activate airbags and seatbelt pretensioners in the event of a collision. Additionally, it stores critical crash data.

As the brain of the Supplemental Restraint System (SRS), this control unit continuously processes data from acceleration and crash sensors distributed throughout the vehicle. When an impact exceeds predefined thresholds, the device makes split-second decisions on which restraint systems need to be deployed to provide optimal occupant protection.

The activation process includes not only front and side airbags but also pyrotechnic seatbelt pretensioners that tighten the seatbelts at the moment of impact. The control unit ensures that all components of the safety system are coordinated and triggered at precisely the right time.

Why does the control unit 96 030 364-95080 fail?

The most common cause of failure for the control unit 96 030 364-95080 is the storage of crash data after an accident, which results in the system being locked out. In addition, purely electronic faults—such as faulty wiring, loose connectors, or internal component failures due to vibration—can lead to malfunctions.

Following a crash, the control unit permanently stores irreversible crash data. This safety feature prevents further use of the vehicle without a thorough inspection of the entire airbag system. As a result, the unit becomes internally blocked and must be professionally reset to restore functionality.

Hardware defects are another frequent cause. Broken wires, corrosion on connectors, or cold solder joints on the circuit board can disrupt communication between the control unit and the sensors or airbags. Likewise, the failure of electronic components like capacitors or resistors due to aging, moisture, or vibration can trigger malfunctions.

In some cases, a fault may appear in the control unit even though the root cause lies in an external component. A defective airbag or malfunctioning seatbelt pretensioner can also put the system into a fault mode, requiring precise diagnosis.

How do you recognize a defect in the 96 030 364-95080?

A defect in the airbag control unit 96 030 364-95080 primarily manifests as a permanently illuminated SRS warning light on the instrument panel. Often, communication between a diagnostic tool and the control unit breaks down entirely, making workshop troubleshooting impossible. Stored error codes also indicate an internal fault.

The most obvious sign is the airbag or SRS indicator light that fails to turn off after the engine starts. This signals a serious issue within the safety system, meaning the airbags might not deploy in the event of a crash.

Another clear symptom is complete loss of communication. If the workshop attempts to read the fault memory via the OBD interface, the diagnostic tool receives no response from the control unit. This strongly suggests a severe internal hardware failure.

Even when communication remains possible, specific error codes stored in memory may point to an irreparable internal fault or to the retention of crash data. Such errors cannot be resolved by simple clearing and require professional repair of the unit.

In which vehicles is the 96 030 364-95080 installed?

The airbag control unit with part number 96 030 364-95080 is specifically designed for use in the Daewoo Nubira J150 vehicle series. It was fitted during model years 1999–2002 across various body styles and engine variants of this model.

At Airbag24, we repair the control unit 96 030 364-95080 for the following specific model:

Daewoo Nubira J150 (model years 1999–2002)

The unit was installed by the manufacturer in several configurations, including the sedan and station wagon versions. Typical engine options where this control unit can be found are the 1.6 16V and 2.0 16V.

How is the 96 030 364-95080 professionally repaired?

Professional repair begins with a comprehensive analysis of the fault memory. Defective electronic components on the circuit board are then replaced through precision soldering. A key step involves resetting the stored crash data to factory settings. Finally, a functional test confirms full operational readiness.

After sending the unopened control unit to Airbag24, we first read out the fault memory to verify the reported defect and identify any additional sources of error. This initial analysis is crucial for the subsequent repair process.

The next step involves electronic refurbishment. Our technicians open the device and perform a visual inspection of the circuit board. Defective components such as capacitors, resistors, or other parts are carefully desoldered and replaced with new, high-quality spare parts. Cleaning the circuit board is also part of the process.

For control units that have been locked following an accident, erasing the crash data is the most important repair step. Using specialized tools, we read out the device’s internal memory and restore it to its factory‑default state. After this, the control unit is fully functional again and free of error codes.

Each repaired control unit undergoes a final functional and quality check to ensure all faults have been resolved. Of course, you receive 2 years' statutory liability for defects on the completed repair.