Airbag control unit with part number 96330572

What is the function of Airbag Control Unit 96330572?

The Airbag Control Unit 96330572 is the central control unit for the occupant protection system, primarily used in the first-generation Chevrolet Evanda (1999–2006). It processes data from crash sensors and is responsible for precisely and reliably deploying airbags and seatbelt pretensioners in the event of a collision.

As the “brain” of the safety system, this ECU (Electronic Control Unit) continuously monitors all connected components, including impact sensors located at the front and sides of the vehicle, as well as the ignition circuits for each airbag and seatbelt pretensioner. When a signal indicating a collision is received, the control unit determines within milliseconds which restraint systems need to be activated to provide optimal protection for occupants.

This component is also known by equivalent part numbers 5WK4 3059, 96406536, 5WY6 4040, 96830382, and 5WY64040-95080—technically identical parts that are used in the same vehicle models.

Why does Control Unit 96330572 fail?

The most common cause of failure for Control Unit 96330572 is the storage of crash data after an accident. This data permanently disables the unit’s functionality and triggers the airbag warning light. Less frequently, defects may occur in internal electronic components such as microprocessors or solder joints.

Even after minor collisions where the airbags did not deploy, the control unit records what is known as a “crash event.” This entry is permanent and cannot be cleared using standard workshop diagnostic tools. It is a manufacturer‑imposed safety measure designed to require a full system check. As a result, the unit becomes locked and must be professionally reset.

During professional repair, not only is the crash data memory erased; technicians also inspect the unit for any secondary damage to its electronics. Defective components or cold solder joints caused by the shock of the accident or aging are identified and repaired, ensuring the control unit regains the full functionality of a new part.

How can you recognize a defect in Control Unit 96330572?

The clearest symptom of a malfunctioning Control Unit 96330572 is a persistently illuminated airbag warning light on the instrument panel. In many cases, the fault memory cannot be cleared with a diagnostic tool either, as the unit remains internally locked after an accident and no longer communicates.

The airbag warning light fails to turn off after starting the vehicle, signaling to the driver that the entire restraint system is disabled and will offer no protective function in the event of another accident. Consequently, the vehicle would fail the mandatory technical inspection (TÜV).

Another clear indication arises when a workshop attempts to read the fault memory and receives messages such as “Control Unit defective” or “Crash data stored.” Attempts to erase the error code invariably fail, confirming the permanent lock within the control unit.

In which vehicles is Control Unit 96330572 installed?

The Airbag Control Unit 96330572, along with its functionally equivalent variants, is specifically designed for the first generation of the Chevrolet Evanda. Repair services are offered for this model and its closely related Daewoo counterpart to restore full functionality to the safety system.

At Airbag24, we repair this control unit for the following model:

Chevrolet Evanda, First Generation (model years 1999–2006)

Our repair expertise also extends to the sister model, the Daewoo Evanda CDX, as well as all equivalent part numbers, including 5WK4 3059, 96406536, 5WY6 4040, 96830382, and 5WY64040-95080.

What are the benefits of repairing Control Unit 96330572?

Repair is an extremely cost-effective and sustainable solution. Compared to purchasing a new unit, you save significantly—often over 70%—and receive a fully functional, tested component. Additionally, there is no need for expensive re‑coding, as the vehicle‑specific data remains intact.

A key advantage is the substantial cost savings. While a new control unit often costs several hundred euros, the price of professional repair is considerably lower. After restoration, its functionality matches that of a brand‑new part, making repair the clear choice for timely maintenance.

Since the original vehicle control unit is repaired, the original coding is preserved. Upon return shipment, the unit can be easily reinstalled (plug-and-play) and immediately operational. There is no need for time-consuming and error-prone programming at an authorized dealer.

The repair is also environmentally friendly, as it avoids electronic waste and conserves valuable resources. With a 12-month warranty on the work performed, you gain added technical assurance.

How does the repair process at Airbag24 work?

The repair process at Airbag24 is designed for maximum efficiency and safety. After removal and shipment of the control unit, a professional diagnosis is carried out, crash data is erased, and all electronic components are thoroughly inspected. The unit is then tested and returned with a 12-month warranty.

First, the defective airbag control unit must be removed from the vehicle at a specialized workshop. You then send it to Airbag24, well-packaged.

Upon receipt at Airbag24, our technicians analyze the unit. The core of the repair involves safely and completely erasing the stored crash data. At the same time, the entire circuit board is examined for additional defects, such as faulty solder joints or damaged components, and repaired if necessary.

Following successful repair, the control unit undergoes a final functional test to ensure flawless communication and proper operation of all system components. The refurbished component is then promptly shipped back to you, ready for reinstallation.

What shipping options are available at Airbag24?

Airbag24 offers flexible and secure shipping solutions for your control unit. For outbound shipping, you can either drop off the package yourself or arrange a convenient UPS pickup. Return shipping is free via UPS Standard, or optionally faster via Express, each with a cash-on-delivery option.

For sending your unit to us, you have two choices: you can ship it yourself or use our free service to drop it off at a UPS Access Point. Alternatively, you can schedule a UPS pickup at your preferred location and time.

For returning the repaired unit, several options are available: free UPS Standard shipping, faster UPS Express shipping, or in-person self-collection. Both Standard and Express shipping can be arranged with cash-on-delivery upon request.