Airbag control unit with part number 9675068880

What does the airbag control unit 9675068880 do?

The airbag control unit 9675068880 coordinates the restraint system (SRS) of Peugeot. It evaluates the crash sensors, decides in the event of an accident within milliseconds whether to trigger airbags and seatbelt pretensioners, and monitors the system continuously. After an accident, it stores crash data and locks itself.

The housing also carries the supplier part number Bosch 0285010828. The unit reports faults via the airbag warning light in the instrument cluster.

While driving, it checks sensors, wiring and control and stores irregularities in the fault memory.

Why does the control unit 9675068880 fail?

The most common cause is stored crash data after an accident, even if no airbag was triggered; a normal diagnostic tool cannot delete it. Other causes in brief:

Besides the crash data, these causes come into consideration:

• ageing electronic components
• cold solder joints
• moisture and corrosion on plug connections
• voltage spikes, for example from a weak battery or jump-starting

Crash data are also created when the impact does not trigger an airbag, and they remain stored in the unit. The other points tend to show over time.

How can you tell that the 9675068880 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently, an error message appears, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared. Airbags and seatbelt pretensioners may then fail to trigger in an emergency.

The warning light is the clearest indication from the system. It shows the fault as soon as the control unit detects it, and it must not be ignored.

A read-out of the fault memory shows which message is stored and points to the next step.

Which vehicles is the 9675068880 fitted in?

The control unit 9675068880 is fitted in these vehicles: Peugeot 207 I (2006-2009) and I Facelift (2009-2015).

These models are assigned to the part number:

• Peugeot 207 I (2006-2009)
• Peugeot 207 I Facelift (2009-2015)

On the one hand, comparing the part number on the label of the removed unit with this page only confirms that you have the right unit. On the other hand, only a fault memory read out beforehand shows whether the control unit itself is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 285001745, 285010110, 285010112, 285010555, 96 668 439 80, 9661440680.

How does the repair of the 9675068880 work?

First have the fault memory read out and attach the log, then disconnect the battery and only afterwards remove the control unit. Next, create a repair order online and send in the well-packed unit. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 checks the unit on the test bench, replaces defective components, deletes stored crash data and carries out a function test. Your unit then comes back to you.

Removal and shipping are your responsibility; testing and repair are Airbag24's. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 9675068880 get to Airbag24?

You send the control unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Put the printed repair order in the parcel and pack the unit shock-proof.