Airbag control unit with part number 9675181780

What is the function of the airbag control unit 9675181780?

The airbag control unit with part number 9675181780 is the central control unit (SRS ECU) of the passive safety system in various Peugeot models. It processes data from crash sensors and determines whether and which restraint systems, such as airbags or seatbelt pretensioners, need to be activated.

As the “brain” of the occupant protection system, this ECU continuously monitors all connected components. These include acceleration sensors at the front and sides of the vehicle, seatbelt pretensioners, airbag modules, and seat occupancy detection. In the event of a collision, it processes incoming signals within milliseconds to ensure timely activation.

Technically, this unit is often associated with the manufacturer Bosch, as indicated by internal identifiers such as 0285010830. Its precise functionality is critical, since any malfunction directly endangers the safety of vehicle occupants.

Why does the control unit 9675181780 fail?

The most common cause of failure for control unit 9675181780 is the storage of crash data after an accident, which results in the unit being locked. In addition, internal hardware defects on the circuit board—such as faulty SMD components, defective voltage regulators, or broken solder joints—are typical sources of failure.

After an airbag deployment, vehicle- and event-specific data are permanently stored in the control unit’s non-volatile memory. This lock cannot be removed simply by clearing the fault memory at a workshop; a professional repair involving a so‑called crash reset is required to restore full functionality.

Electronic faults are another widespread cause. Components like capacitors or voltage regulators may fail due to age or voltage fluctuations. Corrosion caused by moisture ingress or hairline cracks in solder joints can also lead to malfunctions, which manifest as specific error codes such as B1000 or 1712 FC1 (control unit defective).

It’s important to note that this control unit is also known under other part numbers, such as 9666775480 or 9674291480. The internal Bosch number is often 0285010830. Regardless of the number, these are technically very similar or identical units with the same potential weaknesses.

How do you recognize a defect in 9675181780?

A defect in the airbag control unit 9675181780 is primarily indicated by the airbag warning light constantly illuminated on the instrument cluster. Additional signs include loss of communication with the diagnostic tool or specific error messages related to seatbelt pretensioners and crash wiring.

The most noticeable symptom is the persistent illumination of the airbag warning light. It fails to turn off after starting the engine, signaling a serious, safety‑relevant system fault that will result in a significant deficiency during the next mandatory inspection.

Another clear indication is when the workshop’s diagnostic equipment cannot establish a connection to the airbag control unit. If the ECU does not respond to queries, it often points to a complete internal failure.

Sometimes, errors are displayed that suggest faulty components like seatbelt pretensioners or sensors—even though these are functioning properly. In such cases, the root cause usually lies in the central control unit itself, which can no longer process signals correctly.

In which vehicles is 9675181780 installed?

The airbag control unit 9675181780 is mainly used in various Peugeot vehicles. It can be found across multiple generations and facelift variants of the Peugeot 3008 and Peugeot 5008 models. A comparison of the part number is essential for accurate identification.

At Airbag24, we repair the 9675181780 control unit for the following models known to us:

Peugeot: 3008 I (2009–2013), 3008 I Facelift (2013–2016), 5008 I (2009–2013), 5008 I Facelift (2013–2017), 5008 II (2017–2020), 5008 II Facelift (2021–2024)

Since manufacturers often use multiple part numbers for technically identical components, it is crucial to verify the number stamped on your control unit’s housing before sending it in.

How does the repair of 9675181780 proceed?

Professional repair begins with the submission of the removed control unit. At Airbag24, an initial incoming inspection is followed by a detailed fault diagnosis. Depending on the findings, the repair includes resetting crash data, replacing defective components, and concluding with a functional test.

Once the control unit arrives at Airbag24, it first undergoes a visual inspection. This is followed by technical analysis on a test bench, where the fault memory is read out and communication with all inputs and outputs is verified. This allows for precise localization of the exact cause of the fault.

The actual repair is performed at the component level, with strict adherence to ESD protection measures. Stored crash data is erased through a memory reinitialization. Defective electronic components such as resistors, capacitors, or processors are replaced with new, specification‑compliant parts. Finally, all solder joints are inspected and reworked if necessary.

Before returning the unit, each repaired control module undergoes a comprehensive final test. Its proper functionality is verified in a simulation setup to ensure it operates flawlessly once installed in the vehicle. We provide a 12‑month warranty on every repair.

What shipping options does Airbag24 offer?

You can either send your defective control module yourself for repair or arrange a convenient UPS pickup at your preferred location. For returns, Airbag24 offers free standard UPS shipping. Faster express and cash‑on‑delivery options are also available.

For sending the unit to us, you have two choices: you can ship the package directly, or use UPS’s paid pickup service, which collects the control module from your address.

Return shipping is free via standard UPS delivery, with typical transit times of 1–3 business days. If you need faster delivery, you can opt for UPS Express shipping (1–2 business days) for an additional fee.

In addition, both standard and express shipping are available as cash‑on‑delivery options. Of course, you can also pick up your repaired control module in person at our facility.