Airbag control unit with part number 96FG-14B056-CC

What is the function of the Airbag Control Unit 96FG-14B056-CC?

The Airbag Control Unit 96FG-14B056-CC is the central control module for the occupant protection system, specifically designed for the third-generation Ford Fiesta. It is responsible for evaluating signals from crash sensors and precisely activating airbags and seatbelt pretensioners in the event of a collision.

As the brain of the passive safety system, this module continuously monitors all connected components. It ensures that the system operates correctly in an emergency, providing optimal protection for occupants.

A malfunction in this critical safety component can completely impair or prevent the airbags from deploying. Therefore, flawless functionality is essential for vehicle safety.

Why does the 96FG-14B056-CC control unit fail?

The most common causes of failure for the 96FG-14B056-CC control unit are internal electronic faults leading to communication breakdowns, as well as stored crash data after an accident that locks the device. Water damage or general wear and tear of components can also result in total failure.

A typical symptom is complete loss of communication. In such cases, the control unit becomes inaccessible via the diagnostic interface, making external fault analysis impossible.

Following a crash, so‑called crash data is stored in the unit’s memory. This lockout prevents further use and must be professionally reset by a specialist.

Internal control unit errors, indicated by error code B1342, point to defects in the hardware components on the circuit board. Moisture from water damage can also cause corrosion and short circuits.

This control unit is also known under alternative part numbers G2BT-14B321-BB, 2BFK70014003, YS6T-14B056-BC, and 607B03807, which may exhibit similar technical failure patterns.

How do you recognize a defect in the 96FG-14B056-CC?

A defect in the 96FG-14B056-CC control unit primarily manifests as the airbag warning light remaining constantly illuminated in the cockpit. Another clear indication is that workshop diagnostic tools cannot establish communication with the control unit, preventing fault diagnosis via the OBD interface.

The most obvious symptom is the airbag warning light that fails to turn off after starting the vehicle. This signals a serious issue within the restraint system that requires immediate inspection.

If a workshop’s diagnostic tool cannot communicate with the airbag control unit, this strongly suggests a complete internal failure of the module itself.

Reading the specific error code B1342 (control unit error) confirms an internal electronic fault, making repair or replacement unavoidable.

In which vehicles is the 96FG-14B056-CC control unit installed?

The airbag control unit with part number 96FG-14B056-CC is specifically designed for the third-generation Ford Fiesta (MK3), manufactured between 1989 and 1996. At Airbag24, this module is professionally refurbished exclusively for this vehicle model.

At Airbag24, we repair the 96FG-14B056-CC control unit, as well as functionally equivalent variants for the following model:

Ford Fiesta 3 (model years 1989–1996)

How is the 96FG-14B056-CC professionally repaired?

Professional repair at Airbag24 begins with a detailed diagnosis of the submitted control unit. Technicians analyze the hardware and stored fault codes, rectify electronic defects at the component level, and erase any existing crash data if necessary. Finally, full functionality is validated.

Once the removed control unit arrives at Airbag24, it undergoes a comprehensive incoming inspection. During this process, the exact fault is verified to ensure targeted repairs. It is advisable to confirm before removal that the source of the problem is indeed the control unit.

The repair procedure involves eliminating electronic fault sources on the circuit board and restoring communication. If crash data has been stored after an accident, it is expertly erased to fully restore the module’s operational readiness.

After successful refurbishment and final functional testing, the control unit is prepared for return shipment. We provide a 12-month warranty on every repair performed.

What shipping options does Airbag24 offer?

For repairing your control unit at Airbag24, you can either send the package yourself free of charge or arrange a convenient UPS pickup. For return shipping, both free standard UPS delivery and faster express options are available. Cash-on-delivery and self-collection are also possible.

For returning the unit, you have two convenient options: either send the defective control unit to us yourself at no cost, or arrange for UPS to pick it up directly from your preferred location.

Once the repair is complete, we will ship your device back to you by default using free UPS Standard shipping.

If you require faster delivery, you can opt for UPS Express shipping. For maximum payment flexibility, we offer both Standard and Express shipping with cash-on-delivery available.

Of course, you also have the option to pick up your repaired control unit in person at our premises.