Airbag control unit with part number 9810363180

What is the function of the airbag control unit 9810363180?

The airbag control unit 9810363180 is the central control module of the occupant restraint system (SRS) in various Peugeot 208 models. It processes data from acceleration and seatbelt force sensors and, within milliseconds, determines whether to deploy airbags and tighten seatbelts, ensuring occupant safety in the event of a crash.

As an SRS module (Supplemental Restraint System), it continuously monitors all connected components—such as airbag modules, seat occupancy detectors, and seatbelt pretensioners—for proper functionality.

Upon detecting a fault or following a collision, the unit stores relevant data and illuminates the airbag warning light on the instrument cluster to alert the driver.

Why does the airbag control unit 9810363180 fail?

The most common cause of malfunction in control unit 9810363180 is the storage of crash data after an accident. Other failures stem from internal electronic defects, such as faulty SMD components (e.g., memory chips, voltage regulators, MOSFETs) or damaged solder joints on the circuit board.

After deploying airbags or tightening seatbelts, the control unit locks itself by writing “crash data” into its internal memory. This state prevents further use without professional reset and is not a true malfunction but rather a safety precaution.

Hardware defects are another major cause. Over time, thermal stress and vibrations can lead to cold solder joints or failure of sensitive electronic components. Damaged connector contacts can also disrupt communication.

During diagnosis, it’s crucial to identify the exact hardware and software version. Part number 9810363180 is often paired with software ID 285012632 (also listed as 0285012632), which is essential for successful repair and compatibility verification.

How do you recognize a defect in control unit 9810363180?

A defect in the airbag control unit 9810363180 typically manifests as a permanently or intermittently illuminated airbag warning light on the dashboard. In some cases, communication between the control unit and a diagnostic tool via the OBD interface may also be lost, complicating troubleshooting.

The primary and unmistakable symptom is the activated SRS warning lamp, indicating that the safety system is not fully operational and may fail to deploy correctly in the event of a crash.

Another clear sign is when a workshop using an SRS‑compatible diagnostic device cannot read the fault memory. The control unit fails to respond to requests, suggesting a serious internal fault or a disruption in CAN bus communication.

In which vehicles is control unit 9810363180 installed?

The airbag control unit with part number 9810363180 is primarily used across various generations and variants of the Peugeot 208. At Airbag24, we repair this control unit for both the first and second series, as well as their respective facelift models, ensuring broad coverage of this vehicle type.

Specifically, this part number applies to the following models and model years:

Peugeot: 208 I (2012–2015), 208 I Facelift (2015–2019), 208 II (2019–2023), and 208 II Facelift (from 2023 onward).

How is control unit 9810363180 professionally repaired?

Professional repair of control unit 9810363180 at Airbag24 includes precise diagnostics, secure erasure of stored crash data, and component-level electronics restoration. Following repair, the unit’s proper functionality is verified to restore full safety and reliability.

Upon receipt, the control unit is analyzed in an ESD‑protected laboratory. First, efforts are made to read the fault memory and identify stored crash data.

Specialized tools enable resetting the control unit to factory settings by safely erasing crash event records from memory (EEPROM/Flash).

If a hardware defect is detected, faulty SMD components—such as memory chips or voltage regulators—are replaced using rework soldering stations, or solder joints are reworked under a microscope.

Finally, after hardware repair, a reinitialization or vehicle‑specific coding is often required to ensure seamless communication with other vehicle systems. Airbag24 provides a 12‑month warranty on every repair.

What shipping options does Airbag24 offer?

For repairing your control unit, Airbag24 offers flexible and secure shipping options. You can send the defective component free of charge or arrange convenient UPS pickup. For return shipping, free standard options are available, along with faster express services—even cash on delivery.

For the initial shipment, you have a choice: either send the package to us yourself or take advantage of our convenient UPS pickup service directly from your preferred location.

The return shipment is standardly free via UPS Standard, which typically takes 1–3 business days.

If you need it faster, you can opt for UPS Express delivery (delivered in 1–2 business days). Both options are also available as cash-on-delivery shipments.

Of course, personal collection at our premises is also possible once the repair is complete.