Airbag-Steuergerät mit der Teilenummer 9818459680

What is the function of Airbag Control Unit 9818459680?

The airbag control unit with part number 9818459680 is the central control module for the passive safety system, primarily installed in the Peugeot 508 SW II. It continuously monitors data from crash sensors and, in the event of a collision, determines whether and which restraint systems—such as airbags and seatbelt pretensioners—should be activated.

As the “brain” of the airbag system, this module ensures that all components operate correctly. It performs a self-diagnosis at every vehicle start-up and reports malfunctions via the airbag warning light on the instrument panel. Its primary role is to guarantee occupant safety at the critical moment.

Interestingly, part number 9818459680 is also used in other vehicles from Peugeot, Citroën, or Opel as a start-stop control unit or engine management module. Therefore, the specific vehicle model context is crucial. However, for the Peugeot 508 SW II, its function as an airbag control unit is clearly confirmed.

Why does Airbag Control Unit 9818459680 fail?

The most common causes of failure for control unit 9818459680 are stored crash data following an accident, which locks the device, as well as internal hardware defects on the circuit board. These issues result in specific fault codes such as B1000 or U1F00 and can completely prevent communication with diagnostic tools.

After a collision, the control unit stores so‑called crash data. This data is permanent and cannot be erased using standard workshop testers. For safety reasons, the unit becomes locked and must be reset by a specialist.

Another frequent cause is internal defects in electronic components. Fault codes like B1000 (control unit defective) or U1F00 (internal malfunction, “error not registered in the BSI”) directly indicate hardware failures—such as processors, sensors, or memory modules. Such defects prevent the entire system from functioning properly.

In some cases, internal defects lead to complete loss of communication. The control unit then becomes unreachable via the OBD interface, making external diagnostics impossible.

This control unit is often related to or interchangeable with similar part numbers such as 9678656380, 9648482980, or 9652183780. The fault patterns in these variants are usually identical.

How do you recognize a defect in Control Unit 9818459680?

A defect in the airbag control unit 9818459680 typically manifests as a permanently illuminated airbag warning light on the dashboard. Additionally, specific fault codes such as B1000 may be read, or the control unit may no longer respond to diagnostic requests at all, indicating total failure.

The clearest symptom is the persistently lit airbag warning lamp. It does not extinguish after starting the vehicle, signaling a serious issue within the safety system that requires immediate inspection.

During professional diagnostics at a workshop, specific fault codes are retrieved. Codes like B1000 (control unit defective) or U1F00 (internal malfunction) clearly indicate that the problem lies directly within the control unit itself, rather than in an external sensor or wiring harness.

Another critical symptom is the absence of communication. If the workshop attempts to access the airbag control unit via the OBD port but receives no response, further troubleshooting becomes impossible, often confirming an internal defect in the module.

In which vehicles is Control Unit 9818459680 installed?

The control unit with part number 9818459680 is specifically designed as an airbag module for the Peugeot 508 SW II. In other PSA Group vehicles (Peugeot, Citroën), as well as in Opel models, the same part number may also serve other functions, such as managing the start-stop system.

At Airbag24, we repair part number 9818459680, which is mainly used as an airbag control unit in the following model:

Peugeot: 508 SW II (model years 2018–2023) and in the facelifted version (2023–2025).

It’s important to note that this part number is also listed as a start-stop or engine management module in models such as the Citroën C4, DS3, DS4, DS5, or Opel Vivaro. Our repair service applies exclusively to its function as an airbag control unit.

How is Control Unit 9818459680 repaired?

At Airbag24, repairs follow a professional, standardized process. After receiving the removed control unit, our technicians analyze the hardware, replace defective components, and reset any stored crash data. Final tests ensure full functionality.

Beforehand, a specialized workshop should clearly attribute the fault to the control unit and prepare a diagnostic report. The removed unit is then sent to Airbag24 along with a detailed description of the issue.

Upon receipt, a detailed component-level diagnosis is performed. Defective parts on the circuit board are expertly replaced, and any stored crash data is professionally and completely erased. The control unit is thus restored to a condition equivalent to that of a new part.

After repair, the device is fully functional again. In some cases, post-installation vehicle-specific coding or adjustment at a specialized workshop may be required to ensure communication with other systems, such as the BSI. We provide a 12-month warranty on every repair.

Is it worth repairing 9818459680?

Yes, repair is the most economically and technically sensible solution. Compared to a new part, which can cost up to €800, refurbishment offers substantial cost savings. The repaired unit then functions just like a new one, complete with a 12-month warranty.

The biggest advantage lies in the significant cost reduction. According to the manufacturer, a new airbag control unit with part number 9818459680 can range from €750 to €800. Repair is considerably cheaper while restoring full functionality.

A repaired control unit is technically equivalent to a new one. All safety-relevant data, especially crash data, is reliably erased, and defective components are replaced with new ones. Moreover, repair is a sustainable solution, preserving valuable electronics and reducing electronic waste.

What shipping options does Airbag24 offer?

Airbag24 provides flexible shipping options for your control unit. You can send the package yourself or arrange a convenient UPS pickup. For returns, you have free standard shipping, fast express shipping, and cash-on-delivery options, allowing you to tailor the process to your needs.

For outbound shipments, you have two choices: you can ship the control unit to us yourself or schedule a UPS pickup at your preferred location.

For returning the repaired unit, we offer the following options:

Free UPS standard shipping (1–3 business days delivery)

UPS express shipping (1–2 business days delivery)

UPS standard shipping with cash-on-delivery (1–3 business days delivery)

UPS express shipping with cash-on-delivery (1–2 business days delivery)

In addition, self-collection directly at our premises is also available.