Airbag control unit with part number 9824812180

What does the airbag control unit 9824812180 do?

The airbag control unit 9824812180 controls the restraint system (SRS) for Peugeot. It reads the crash sensors, decides within milliseconds in an impact whether airbags and seatbelt pretensioners are triggered, and monitors the system continuously.

The housing additionally carries the manufacturer number Continental A2C11493501.

Faults are shown via the airbag warning light. After an accident, the unit stores crash data and locks itself; only the repair lifts the lock.

Why does the control unit 9824812180 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed; a normal diagnostic tool cannot remove it. Other causes that may come into play are aged components, cold solder joints, moisture and corrosion on plug connectors, and voltage spikes, for example from a weak battery.

Airbag24 removes the crash data as part of the repair.

The other causes concern electronics and connections. Which of them applies is shown only by reading out the fault memory.

How can you tell that the 9824812180 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently. An error message in the instrument cluster, a missing connection from the diagnostic tool to the control unit and a fault memory that cannot be cleared are also possible.

In an emergency, airbags and seatbelt pretensioners may then possibly not trigger.

Where exactly a fault comes from is shown only by reading out the fault memory.

Which vehicles is the 9824812180 fitted in?

The unit 9824812180 is fitted in these vehicles: Peugeot 3008 II (2016-2020) and II Facelift (2021-2023). The basis is the part number; no check of your car takes place.

The following vehicles are stored for this part number:

• Peugeot 3008 II (2016-2020)
• Peugeot 3008 II Facelift (2021-2023)

Comparing the number on the label of the unit with this page only confirms its identity. It contributes nothing to determining the cause. For this reason, have the fault memory read out beforehand: only that result shows whether the control unit is defective or whether a plug or cable is at fault.

For the same vehicles, we also repair control units with the part numbers 1658663080, 9824811680.

How does the repair of the 9824812180 work?

The processing time at Airbag24 for checking, repairing and testing is usually 3–4 working days. Before removal, have the fault memory read out and disconnect the battery; then create the repair order online and send the unit in.

Airbag24 inspects the control unit on the test bench and replaces defective components. This is followed by deleting the crash data and a function test. Afterwards your own unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 9824812180 get to Airbag24?

Either you pack the unit as a parcel, or you book a UPS collection for an extra charge. Airbag24 sends the unit back by UPS after the repair.

Print the repair order and enclose it; pack the unit shock-proof.