Airbag control unit with part number 9826470080

What does the airbag control unit 9826470080 do?

The airbag control unit 9826470080 controls the restraint system (SRS) for Peugeot. It evaluates the signals from the crash sensors, decides in an accident within milliseconds on the triggering of airbags and seatbelt pretensioners, and checks the system continuously.

The manufacturer number Bosch 0285014527 is additionally stamped on the housing. The unit reports faults via the airbag warning light, and after an accident it stores crash data and locks itself.

Why does the control unit 9826470080 fail?

Stored crash data is the most common cause with the 9826470080, even if no airbag has deployed. Further causes are ageing components, cold solder joints, moisture at plug connections and voltage spikes.

A normal diagnostic tool cannot erase the crash data. Airbag24 removes it during the repair. The further causes at a glance:

• ageing electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or a jump start

How can you tell that the 9826470080 is defective?

A defect in the 9826470080 shows itself at the airbag warning light in the instrument cluster, at an error message there, at a missing connection to the diagnostic tool and at a fault memory that cannot be cleared. In an emergency, the airbags and seatbelt pretensioners may then not deploy.

The warning light may be on permanently or only intermittently. Both are a sign that you should not ignore.

Even a vehicle that behaves normally in everyday use can show these signs. Therefore have the message checked promptly.

Which vehicles is the 9826470080 fitted in?

The 9826470080 is fitted in these vehicles: Peugeot 2008 I Facelift (2016-2019).

This overview lists the vehicles that belong to this number:

• Peugeot 2008 I Facelift (2016-2019)

Compare the part number on the label of the removed unit with this page. That only confirms that you have the right unit in front of you. Have the fault memory read out beforehand, because only this result shows whether the control unit is defective or whether a cable or plug is the cause.

For the same vehicles, we also repair control units with the part numbers 285012924, 9665266080, 98 127 133 80, 9808309280, 9812713780.

How does the repair of the 9826470080 work?

For the 9826470080, first have the fault memory read out and attach the log. Then disconnect the battery and only then remove the control unit. Online you create the repair order, and you send in the well-packed unit.

The sequence protects you when working on the vehicle.

At Airbag24 the unit is examined on the test bench, defective components are replaced, crash data is erased and a functional test is carried out. Processing at Airbag24 usually takes 3–4 working days. After that, your own unit goes back. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 9826470080 get to Airbag24?

You send the control unit 9826470080 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back by UPS.

The printed repair order goes into the parcel. Pack the unit shock-resistant.