Airbag control unit with part number 985105409R

What is the function of the airbag control unit 985105409R?

The airbag control unit with part number 985105409R is the central control module for the occupant restraint system in various Dacia models. It processes data from the acceleration sensors and, within milliseconds, determines whether and when the airbags and seatbelt pretensioners need to be deployed in the event of a crash.

As an original Renault/Dacia component, it is responsible for monitoring all safety‑related components such as airbags, seatbelt pretensioners, and sensors. It continuously analyzes signals from the crash sensors to detect an imminent collision and precisely activate the passive safety systems.

At the same time, the control unit performs continuous self‑tests. If an internal fault or a problem in the system connection is detected, it illuminates the airbag warning light on the dashboard to alert the driver.

Why does the control unit 985105409R fail?

The most common cause of failure for the control unit 985105409R is the storage of crash data after an accident, which the system locks for safety reasons. Other defects arise from internal electronic failures in components or water damage leading to corrosion.

After an accident in which the airbags have been deployed, the unit permanently stores crash data. This hardware lock prevents further use and must be professionally reset to restore full functionality.

Internal electronic faults are another frequent cause. Components on the circuit board can fail due to aging or electrical disturbances, often resulting in total failure or loss of communication capability, which may manifest as error codes such as B1000.

Water damage caused by leaks in the vehicle can also harm the control unit. Ingressing moisture leads to corrosion and short circuits on the circuit board, making repair unavoidable.

How do you recognize a defect in the 985105409R?

A defective airbag control unit 985105409R almost always shows up as a constantly illuminated airbag warning light on the instrument cluster. Additionally, the workshop often cannot establish communication with the control unit because it no longer responds to diagnostic requests (communication error).

The primary symptom is the persistently lit airbag warning light. It does not turn off after starting the engine, signaling a serious fault in the safety system. Such a vehicle would fail a main inspection (TÜV).

Another clear indication is when a diagnostic tool cannot communicate with the airbag control unit. The workshop will then typically display an error message like “No communication with the airbag control unit” or the specific error code B1000, pointing to an internal hardware defect.

In which vehicles is the control unit 985105409R installed?

The part number 985105409R is an original control unit primarily used in various Dacia models, including the Dacia Dokker, Duster, Lodgy, and several older series from the manufacturer.

At Airbag24, we repair part number 985105409R for the following Dacia models:

Dacia Dokker I (2012–2021), Dacia Dokker Van I and Dokker Express I, Dacia Lodgy Ambiance I, and Dacia Duster Laureate I. Furthermore, it is also found in older series such as the Dacia 1410 I, 1210 I, 1304 I, 1320 I, 1600 I, Drop Side I, 1310 CN I, and 1410 Sport I.

What are the advantages of repairing the 985105409R?

Repairing the original control unit 985105409R is an economically and technically sensible alternative to costly new purchases. Not only do you save significantly compared to the new part price of approximately €320, but you also retain the vehicle’s original configuration.

The biggest advantage is substantial cost savings. Repairing is considerably cheaper than buying a new unit while fully restoring functionality. You receive a solution that is technically equivalent to a new part.

By refurbishing the original component, the vehicle‑specific coding remains intact. This greatly simplifies reinstallation, as time‑consuming re‑learning or programming—often required with new parts—is usually unnecessary. Only resetting the fault memory may be needed.

Airbag24 provides a 12‑month warranty on every repair. Moreover, repairing is a sustainable choice, avoiding electronic waste and conserving valuable resources.

How does the repair process work at Airbag24?

The repair process at Airbag24 is designed for maximum safety and efficiency. Following a professional diagnosis and shipping of the removed control unit, a detailed analysis is performed, repairs are carried out at the component level, and a final functional test is conducted before the unit is returned ready for installation.

First, a specialized workshop should clearly attribute the fault to the airbag control unit. A diagnostic report included with the package will expedite processing. Subsequently, the defective unit is removed and securely packaged for shipment to us.

At Airbag24, our technicians perform an incoming inspection. The repair process includes professionally erasing stored crash data, as well as analyzing and replacing any faulty electronic components on the circuit board.

Following successful repair, each control unit undergoes a comprehensive functional test. Once all tests are passed, the unit is prepared for return shipping and can be reinstalled in your vehicle upon receipt.

What shipping options are available?

For convenient handling, Airbag24 offers flexible shipping options. You can either send the defective control unit yourself or arrange for UPS pickup at your preferred location. For return shipping, you have access to free standard shipping, express options, and cash-on-delivery.

For outbound shipping, you can either mail the package to us yourself or use the convenient UPS pickup service, which collects the package directly from your address.

For returning your repaired control unit, we provide several options: free UPS standard shipping, faster UPS express shipping, and both options also available with cash-on-delivery. Personal collection at our premises is also possible.