Airbag control unit with part number 98820-4BS0A

What is the function of the airbag control unit 98820-4BS0A?

The airbag control unit with part number 98820-4BS0A is the central control module for the occupant protection system in the Nissan Rogue T32. It analyzes data from crash sensors and is responsible for precisely and rapidly deploying the appropriate airbags and seatbelt pretensioners in the event of a collision, thereby protecting occupants.

The control unit 98820-4BS0A serves as the brain of the entire airbag system. It continuously monitors all connected components, including crash sensors, airbag modules, seatbelt pretensioners, and seat occupancy detection.

In the event of an impact, the unit determines—based on the severity and direction of the collision—which restraint systems need to be activated. This critical function makes it one of the most safety‑relevant components in the vehicle.

Why does the control unit 98820-4BS0A fail?

The most common reason for requiring repair of the control unit 98820-4BS0A is the storage of crash data after an accident. This data locks the unit’s functionality and must be professionally reset. General malfunctions or defects in internal electronic components can also lead to failure.

Even if not all airbags deployed during a crash, the control unit stores what is known as a “crash record.” For safety reasons, this record locks the unit and prevents further use. An electronic repair can remove this lock and restore full functionality.

In addition, defects within the internal systems—such as those affecting side airbags—can cause malfunctions. Factors like moisture damage or improper past repairs may complicate fault diagnosis and subsequent repair work.

How do you recognize a defect in the 98820-4BS0A?

A defect in the control unit 98820-4BS0A primarily manifests as a permanently or intermittently illuminated airbag warning light on the instrument panel. Often, the control unit can no longer be accessed via a diagnostic tool, or error codes related to stored crash data or internal malfunctions appear.

The clearest indication of a problem in the airbag system is the warning light illuminating on the dashboard. It alerts the driver that the safety system is not fully operational and may fail to deploy correctly in the event of a crash.

Another clear symptom is when the workshop’s diagnostic equipment cannot establish communication with the airbag control unit. The unit no longer responds to queries, indicating a serious internal fault.

Entries stored in the fault memory—such as “crash data saved” or malfunctions in specific airbag circuits (e.g., side airbags)—are also direct indicators of a defect in the control unit itself.

In which models is the control unit 98820-4BS0A installed?

The airbag control unit with part number 98820-4BS0A was specifically developed for the Nissan Rogue T32 series. At Airbag24, we offer professional repair services for this control unit, which was used in model years approximately from 2013 to 2020.

At Airbag24, we specialize in repairing this particular control unit for the following vehicle model:

Nissan Rogue T32 (model years 2013–2020)

How does the repair of the 98820-4BS0A proceed?

After sending the removed control unit 98820-4BS0A to Airbag24, it undergoes thorough analysis. The repair process includes professionally erasing the stored crash data and restoring the original functionality. Each repair comes with a 12-month warranty.

To avoid misdiagnosis, it is recommended to perform a detailed vehicle diagnostic before removing the control unit. This ensures that the issue truly lies within the control unit itself, rather than in an external component such as a sensor or wiring harness.

Once the defective unit arrives at Airbag24, technicians carry out a professional electronic repair. During this process, error codes are cleared, and the unit is returned to its original, fully functional condition.

Subsequently, the control unit undergoes a final functional test. This repair provides a cost-effective and sustainable alternative to expensive replacement purchases and includes a 12-month warranty.

What shipping options are available?

You can either ship your control unit to Airbag24 free of charge yourself or arrange a convenient UPS pickup. For return shipping, we offer free standard UPS delivery as well as optional express and cash-on-delivery services. Self-collection is also possible.

For returning your defective control unit, you have two options: you can ship the package to us yourself or use UPS’s pickup service, which will collect the package from a location of your choice.

The return shipment of the repaired unit is provided free of charge by default via UPS Standard shipping. If you require faster delivery, UPS Express shipping is available for an additional fee.

Both standard and express shipping options are also available as cash-on-delivery services. Alternatively, upon prior arrangement, you may pick up your repaired control unit directly from our premises.