Airbag control unit with part number 98820 5X20B

What is the function of the Airbag Control Unit 98820 5X20B?

The airbag control unit with part number 98820 5X20B is the central control unit (SRS Control Unit) for the occupant protection system, primarily used in the Nissan Navara D40. It is responsible for monitoring all relevant sensors, storing fault codes, and recording crash data to deploy airbags and seatbelt pretensioners in the event of a collision.

As the “brain” of the passive safety system, this module continuously processes data from acceleration and angular velocity sensors. In the event of a crash, it determines within milliseconds which restraint systems need to be activated. After an accident, so‑called crash data is permanently stored in the device’s internal memory, effectively disabling the system’s reactivation.

In addition, the control unit performs a self‑test every time the vehicle is started. If any faults are detected—such as issues with an airbag, a seatbelt pretensioner, or the wiring—the airbag warning light on the instrument panel illuminates to alert the driver.

Why does the control unit 98820 5X20B fail?

The most common cause of failure for the control unit 98820 5X20B is the storage of crash data after an accident, which results in the system being locked. Other defects arise from moisture ingress, electronic component failures, or problems in the external wiring that can damage the unit internally.

Following a collision, the manufacturer intentionally locks the control unit as a safety measure to prevent reuse without professional diagnostics. Repairing by erasing this stored data offers an economical and safe alternative to replacing the entire unit.

Moisture is another frequent cause of failure. Water ingress can lead to corrosion on the circuit board and damage sensitive electronic components such as capacitors or processors. Failed repair attempts or general aging of the electronics can also result in complete system failure.

Similar failure patterns may occur with related part numbers for the Nissan Navara D40, including 98820 EB01D, 28556EA100, 98820 EB01B-14, 988205X60A, and 98820BK50A. Often, their internal architectures and sources of failure are comparable.

How do you recognize a defect in the control unit 98820 5X20B?

A defect in the control unit 98820 5X20B typically manifests as a permanently illuminated or flashing airbag warning light. Additional clear symptoms include loss of communication with a diagnostic tool or specific error codes indicating an internal fault or stored crash data.

The most obvious sign is the activated SRS warning light in the cockpit. This indicates a problem with the restraint system and remains on after starting the engine, rather than turning off after a few seconds as usual.

A more serious symptom occurs when a specialized workshop cannot establish communication between the diagnostic tool and the airbag control unit. The unit no longer responds to requests, often pointing to an internal hardware failure.

When reading the fault memory, codes such as “component defective,” “internal error,” or specific entries like B1049 (interruption in the driver airbag ignition circuit) are frequently recorded. Stored crash data is also displayed as an unerasable fault, further locking the system.

It is important to have external sources of potential faults ruled out by a workshop before removing the control unit. Defective connectors under the seats, a broken flat cable in the slip ring, or damaged SRS wiring can produce similar symptoms.

In which vehicles is the control unit 98820 5X20B installed?

The airbag control unit with part number 98820 5X20B is specifically designed for models of the Nissan Navara D40 series. It is used in both early production models and facelifted versions of this rugged pickup truck. At Airbag24, we repair this control unit covering its entire production lifespan.

At Airbag24, we repair the control unit 98820 5X20B for the following models:

Nissan Navara D40 (model years 2005–2007)

Nissan Navara D40 Facelift (model years 2007–2015)

How does the repair process work at Airbag24?

The repair process at Airbag24 is designed for maximum safety and efficiency. After a professional diagnosis and removal, you send us the defective control unit. Our technicians erase crash data, replace faulty components, and recalibrate the unit before testing it and returning it to you with a 12‑month warranty.

First, a workshop should read the fault memory to confirm that the defect truly lies within the control unit itself. After removal, pack the unit securely for transport and include the completed repair form.

Upon receipt at Airbag24, our technicians perform a thorough analysis. The fault memory is read out to pinpoint the defect, followed by electronic repair. This includes securely erasing crash data, replacing defective components on the circuit board, and inspecting all relevant wires and connectors.

After successful repair, the control unit is calibrated to ensure it functions like new. A final functional test confirms that all faults have been resolved. The repaired unit is then returned for installation. In some cases, a brief re‑learning process in the vehicle may be required after reinstallation. Every repair comes with a 12‑month warranty.

What shipping options are available at Airbag24?

Airbag24 offers flexible and secure shipping options. You can send your defective control unit free of charge yourself or take advantage of the convenient UPS pickup service. Returns are also free via UPS Standard, with Express and Cash-on-Delivery options available.

For outbound shipping, you have two choices: you can mail the package to us yourself or arrange for UPS to pick it up from your preferred location. Pickup is a convenient option if you don’t have time to visit the post office.

For returning the repaired unit, we offer the following options:

- UPS Standard shipping (free)

- UPS Express shipping

- UPS Standard shipping with Cash-on-Delivery

- UPS Express shipping with Cash-on-Delivery

- Local self‑pickup