Airbag control unit with part number 98820-5Z080

What is the function of Airbag Control Unit 98820-5Z080?

The Airbag Control Unit 98820-5Z080 is the central control module for the occupant protection system in Nissan Quest vehicles of model series V40 and V41. It serves as the sensor-side airbag control module, processes signals from crash sensors, and determines, in the event of a collision, whether to deploy the relevant airbags and seatbelt pretensioners, thereby ensuring the safety of vehicle occupants.

The control unit with part number 98820-5Z080 is a critical safety component. Its primary task is the continuous monitoring of all components within the airbag system, from impact sensors to the airbag modules themselves.

In the event of a collision, the module analyzes incoming sensor data—such as acceleration and deceleration values—in milliseconds. Based on this data, it decides whether and which restraint systems, such as side airbags, need to be activated.

Why does Airbag Control Unit 98820-5Z080 fail?

A failure of control unit 98820-5Z080 is usually caused by stored crash data following an accident, which permanently locks the device. Other causes include internal electronic defects in components on the circuit board. Repair addresses these issues by erasing the crash data and professionally replacing defective parts.

The most common reason for necessary repair is the storage of crash data. After an airbag deployment, the control unit is internally locked for safety reasons and reports a permanent fault—even if all external airbag components have been replaced. This lock can only be lifted through specialized repair.

In addition to stored crash data, aging or spontaneous failures of electronic components inside the control unit can also lead to malfunctions. These may manifest as communication problems or a warning light that remains constantly illuminated.

For the Nissan Quest V40, there is also an alternative OEM part number, 98820-ZM79C, which performs a similar function and may be subject to comparable defects.

How do you recognize a defect in control unit 98820-5Z080?

A defective Airbag Control Unit 98820-5Z080 typically shows up as a continuously illuminated airbag warning light on the instrument panel. Sometimes the light comes on about 30 seconds after the engine starts. Additionally, communication between the control unit and a diagnostic tool may be completely blocked, making fault diagnosis at the workshop impossible.

The clearest sign of a defect is the persistently lit airbag warning light. It alerts the driver that the restraint system is not functioning and may fail to deploy in the event of a crash.

A specific symptom for this module is the illumination of the warning light approximately 30 seconds after starting the engine. This indicates a fault detected during the internal self-test of the system.

Workshops often find that no communication can be established with the airbag control unit. The diagnostic tool receives no response, preventing the reading of error codes and further narrowing down the issue.

These symptoms persist even after all visible components, such as airbags or seatbelt pretensioners, have been replaced following an accident. The root cause lies in the internally locked control unit itself.

In which vehicles is control unit 98820-5Z080 installed?

The Airbag Control Unit with part number 98820-5Z080 was specifically developed for the Nissan Quest and is used in generations V40 and V41, covering model years from 1992 to 2002. At Airbag24, this control unit is professionally repaired for all corresponding Quest models, including facelift variants.

At Airbag24, we repair the 98820-5Z080 control unit for the following Nissan Quest models:

Nissan Quest: V40 (1992–1995), V40 Facelift (1995–1998), V41 (1998–2000), V41 Facelift (2000–2002).

Manufacturer compatibility has been confirmed for Nissan Quest generations V40 (1992–1998) and V41 (1998–2002, in some cases up to 2003), underscoring the precise assignment of this component.

What are the benefits of repairing 98820-5Z080?

Repairing the 98820-5Z080 control unit offers significant cost savings compared to purchasing a new unit, which can cost around 500 US dollars. A repaired unit is a plug-and-play solution that requires no additional programming, restores full functionality, and is backed by a 12-month warranty.

The key advantage is financial: while a new unit reportedly costs about 495 US dollars, repair is considerably cheaper and helps protect your budget.

A refurbished control unit is ready for use immediately. It does not require time-consuming coding or programming in the vehicle, saving you both workshop costs and time. The repaired module performs exactly like a new part.

Repair restores the full functionality of the airbag system. Additionally, a 12-month warranty is provided on all work performed, offering extra peace of mind.

How does repair at Airbag24 work?

Repair at Airbag24 is straightforward: After removal, simply send in the defective control unit 98820-5Z080. Our technicians conduct a thorough analysis, erase any existing crash data, and repair the electronics. Following a final inspection, you’ll receive the fully functional component back, complete with a 12-month warranty.

The process begins with the professional removal of the airbag control unit from your vehicle. Careful marking of the connectors ensures easy reinstallation later.

Upon receipt at Airbag24, the control unit undergoes a comprehensive incoming inspection. Here, reported faults are verified, and the unit is examined for additional defects.

The actual refurbishment involves erasing stored crash data and repairing or replacing faulty electronic components on the circuit board.

Each repaired control unit is subjected to rigorous functional testing to ensure it meets the manufacturer’s specifications. It is then securely packaged and prepared for return shipment.

What shipping options are available?

For your convenience, you can either ship your control unit to Airbag24 free of charge or arrange for UPS pickup. Return shipping is also standardly free via UPS Standard. Alternatively, express delivery, cash-on-delivery options, and self-collection are available, allowing you to tailor the process to your needs.

For sending your removed control unit, you have two simple choices: You can ship it yourself at no cost, or take advantage of the convenient UPS pickup service from a location of your choice.

For returning the repaired unit, we offer several options. UPS Standard shipping is free of charge.

If you need faster delivery, you can opt for UPS Express. Both Standard and Express shipping are also available as cash-on-delivery options. Alternatively, you may choose to pick up the control unit in person at our facility.