Airbag control unit with part number 98820-EZ20B

What is the function of the airbag control unit 98820-EZ20B?

The airbag control unit with part number 98820-EZ20B is the central control module for the occupant protection system in the Nissan Titan. It continuously analyzes data from acceleration and yaw rate sensors to deploy airbags and seatbelt pretensioners at precisely the right moment in the event of a crash, ensuring occupant safety.

As an original equipment manufacturer (OEM) part, this control unit is specifically designed for the Nissan Titan’s vehicle architecture. It coordinates all components of the passive safety system, from crash sensors and seat occupancy detection to the pyrotechnic initiators in the airbags and seatbelt pretensioners.

The unit is finely tuned to the vehicle’s characteristics, reliably distinguishing between a severe crash requiring deployment and minor collisions or hard braking maneuvers. As such, it serves as a core component of vehicle safety.

What defects occur in 98820-EZ20B?

A common cause of failure for the 98820-EZ20B control unit is the storage of crash data after an accident, which results in the unit becoming locked. Other typical defects include internal hardware failures that lead to complete communication loss, rendering the control unit inaccessible via diagnostic tools.

Even if the airbags did not deploy during a collision, the control unit stores non-erasable crash data. This is a manufacturer‑imposed safety measure designed to prevent reuse without professional inspection and reset. Repair is mandatory in such cases.

In addition, defects in internal electronic components can result in total failure. Such hardware issues often manifest as the unit no longer responding to diagnostic requests or persistently reporting internal error codes that cannot be cleared.

How do you recognize a defect in the 98820-EZ20B control unit?

A defective 98820-EZ20B control unit primarily shows up as the airbag warning light on the instrument cluster remaining illuminated or flashing continuously. Often, the control unit cannot be read by a diagnostic tool (no communication), or persistent error codes appear that cannot be cleared despite intact external components.

The most obvious sign is the airbag warning light that fails to turn off after the engine starts. This indicates a serious fault in the restraint system, requiring immediate inspection at a specialized workshop, as the airbags could be deactivated in a real emergency.

Another clear indication is the absence of communication. If the workshop’s diagnostic tool cannot establish a connection with the airbag control unit, this points to a deep‑seated internal defect within the module.

Sometimes diagnostics are possible, but a permanent error such as “Internal Control Unit Error” is displayed. If this error code persists even when peripheral components are functioning correctly, the root cause lies within the control unit itself.

In which vehicles is the 98820-EZ20B control unit installed?

The 98820-EZ20B airbag control unit is specifically used across various generations of the Nissan Titan. At Airbag24, we professionally refurbish this control unit for the Nissan Titan A60, Nissan Titan H61, and the H61 facelift series. Compatibility is limited to these models, as both software and hardware configurations are vehicle‑specific.

At Airbag24, we repair part number 98820-EZ20B for the following Nissan model lines:

Nissan Titan A60 (2004–2015)

Nissan Titan H61 (2015–2020)

Nissan Titan H61 Facelift (2020–2024)

How does the repair of the 98820-EZ20B proceed at Airbag24?

The repair process for the 98820-EZ20B control unit at Airbag24 begins after proper removal and shipment. Our technicians conduct a systematic analysis to identify the exact cause of the fault. Subsequently, crash data is reset or defective components are replaced. Following successful repair and final testing, we provide a 12‑month warranty.

An essential prerequisite is prior diagnosis at a specialized workshop. It must be confirmed that the fault originates from the control unit itself, rather than from external components such as sensors, wiring harnesses, or the power supply.

Upon receipt at Airbag24, a detailed technical examination follows. Depending on the nature of the fault, stored crash data is expertly erased, or faulty electronic components on the circuit board are replaced with new, high‑quality parts. Our mechatronics specialists employ precise diagnostic and soldering techniques for this purpose.

Each refurbished control unit undergoes a final functional test to ensure proper communication and freedom from errors. Only then is it approved for return shipment.

What shipping options are available at Airbag24?

For repairing your control unit, Airbag24 offers flexible shipping options. You can send the package to us yourself free of charge or arrange a convenient UPS pickup at your preferred location. Returns are equally flexible, with the choice of free standard UPS shipping or UPS Express, each also available with cash-on-delivery.

Shipping your unit to us is straightforward. Simply pack the removed control unit securely and send it to us using a free shipping label. Alternatively, we can arrange for a UPS pickup directly at your location.

For returning the repaired unit, several options are available: free standard UPS shipping, faster UPS Express shipping—both with cash-on-delivery—and in-person pickup at our facility.