
Airbag control unit with part number A1749011406
Also written as: A 174 901 14 06
Control unit repairs for part number A1749011406 in our shop:
Your vehicle isn't listed?
Part number “A1749011406” isn't linked to every vehicle in our database – we can usually repair it anyway. Select your vehicle and we'll show you the matching repair:
What does the airbag control unit A1749011406 do?
The airbag control unit A1749011406 is the central control unit of the restraint system (SRS) in Mercedes-Benz. It evaluates the signals from the crash sensors, decides within milliseconds in an accident which airbags and seatbelt pretensioners are triggered, and monitors the system continuously. After an accident it stores crash data and locks itself.
The crash sensors report acceleration and impact to the control unit. From this it works out whether deployment is necessary, and then controls the connected airbags and seatbelt pretensioners.
During normal driving, the unit checks continuously whether the components of the system are working properly. If it detects a fault, it shows this via the airbag warning light in the instrument cluster.
Why does the control unit A1749011406 fail?
In the control unit A1749011406, the most common cause is crash data stored after an accident, even if no airbag has deployed; a standard diagnostic tool cannot erase it. Other causes are ageing electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.
That no airbag has deployed does not mean nothing was stored. Airbag24 erases the crash data during the repair.
The other causes occur independently of an accident:
- ageing electronic components
- cold solder joints
- moisture and corrosion at plug connections
- voltage spikes, for example from a weak battery or a jump start
How can you tell that the A1749011406 is defective?
You can tell that the A1749011406 is defective from the airbag warning light lighting up permanently or intermittently, a fault message in the instrument cluster, the diagnostic tool having no connection to the control unit, or a fault memory that cannot be cleared.
The signs at a glance:
- The airbag warning light lights up permanently or intermittently.
- A fault message appears in the instrument cluster.
- The diagnostic tool finds no connection to the control unit.
- The fault memory cannot be cleared.
Airbags and seatbelt pretensioners may not deploy in an emergency. You should therefore have the warning checked promptly.
Which vehicles is the A1749011406 fitted in?
The airbag control unit A1749011406 is fitted in these vehicles: Mercedes-Benz CLA-Class C193 Saloon (from 2025) and X193 Shooting Brake (from 2025).
Here you will find the vehicles with this part number:
- Mercedes-Benz CLA-Class C193 Saloon (from 2025)
- Mercedes-Benz CLA-Class X193 Shooting Brake (from 2025)
Before sending it in, it is advisable to compare the part number on the label of the removed unit with this page; this only confirms that it is the correct unit. Also have the fault memory read out. Only that shows whether the control unit is defective or whether a plug or a cable is the cause.
How does the repair of the A1749011406 work?
First have the fault memory read out and enclose the log, then disconnect the battery and remove the control unit A1749011406. Next, create a repair order online and send in the well-packed unit. Airbag24 checks the unit on the test bench, repairs defective components, erases stored crash data and carries out a function test; this normally takes 3–4 working days.
This order is a safety measure, because the battery must be disconnected before removal.
The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required. Our repairs come with 2 years' statutory liability for defects.
How does the control unit A1749011406 get to Airbag24?
You send in the control unit A1749011406 as a parcel or, for an extra charge, book a UPS collection; after the repair Airbag24 returns it to you via UPS.
Put the printed repair order into the parcel and pack the unit shock-proof.
Shipping & repair from Germany
Airbag24 repairs your component in Berlin — usually within 3–4 working days.
Standard shipping within Germany is free; we normally return your part by UPS.
You pay for and insure the inbound shipment to us. On explicit request we ship by express — the extra cost is borne by the customer.
If you withdraw from the contract, you bear the cost of returning the item.
Based on 281 reviews
What our customers say
„Top!!“
„Top“
„Top!“
„Absolutely top, from the order to the shipping. Had a bit of problems because of the connector. Was solved immediately via WhatsApp. Thanks“
Automatically translated · Original: German
„Airbag control unit received today and refitted on an Opel GT to force the passenger airbag. No more fault. Shipping, repair and return fast. Perfect 😃“
Automatically translated · Original: French
„Uncomplicated, fast and easy processing. Was constantly informed about the current status. As stated, repair was not necessary, since error readout and reset was possible. Great service and absolutely trustworthy.“
Automatically translated · Original: German
„I am very satisfied with the service performed by Airbag 24, they did it quickly, solidly and at a very good price. I warmly recommend it.!!!!👌“
Automatically translated · Original: Polish
„Very good service, didn't even take as long as predicted, price/performance excellent. Very detailed installation instructions. Highly recommended.“
Automatically translated · Original: German
„One of the best companies when it comes to service and expertise of Germany.“
Automatically translated · Original: German
„All good, again and again“
Automatically translated · Original: German
„The repair of the AIRBAG control unit was carried out quickly“
Automatically translated · Original: German
„Very fast competent reliable Also cheaper than competitors! Consultation via Mail quick extremely competent and reliable“
Automatically translated · Original: German
„Top!!“



