Airbag control unit with part number G4959-10000

What is the function of the airbag control unit G4959-10000?

The airbag control unit G4959-10000 is the central control module for the entire passive safety system in Hyundai i30 PD models. It processes data from crash sensors and decides, within milliseconds, whether to deploy airbags and seatbelt pretensioners. After a collision, it locks itself by storing crash data.

As the “brain” of the restraint system, this component continuously monitors all connected sensors—such as acceleration and pressure sensors—as well as the ignition circuits of pyrotechnic charges. It ensures that the system remains operational at all times and functions correctly in an emergency.

The primary reason for repair is the irreversible storage of crash data following an airbag deployment. This lockout is intentionally designed by the manufacturer and cannot be cleared using conventional workshop diagnostic tools. Repair restores the unit to its pre-crash state. Control units of this type are manufactured by companies such as TRW, Delphi, or Bosch.

Why does the G4959-10000 control unit fail?

The most common cause of failure is the retention of crash data after an accident, which permanently locks the control unit. In addition, internal electronic faults may occur, indicated by error codes such as B1620 (internal fault) or B1102 (voltage too low) in the fault memory, requiring component-level repair.

Following a crash involving deployed airbags or seatbelt pretensioners, the control unit writes a so‑called “crash record” into its internal non-volatile memory. This measure enhances safety by preventing further use of a potentially damaged system. Professional repair is the only way to lift this lockout.

Error code B1620 points to an internal hardware fault, possibly caused by defective memory chips, processors, or other electronic components on the circuit board. Code B1102 may indicate issues with the module’s power supply. Neither of these is a simple software issue; both require physical restoration.

The G4959-10000 control unit is directly compatible with part number 95910-G4000. Similar repair procedures also apply to related control units from older Hyundai i30 models (GD generation), such as numbers 95910-A6110 or 95910-A6000.

How do you recognize a defect in the G4959-10000?

The clearest symptom is a constantly illuminated or flashing airbag warning light on the instrument panel. When reading the fault memory, errors such as “crash data stored” or specific internal fault codes (e.g., B1620) typically appear and cannot be erased. In some cases, accompanying symptoms like a malfunctioning clock may also occur.

The airbag warning light is the system’s primary indicator. If it remains lit after starting the engine, the control unit signals a critical fault that compromises the entire restraint system’s functionality. In the event of another accident, protective functions can no longer be guaranteed.

A professional diagnosis using appropriate workshop equipment, such as a HiScan, is essential. Only then can the exact fault code be read and determined whether the issue stems from stored crash data or an internal defect.

Other, rarer signs may include complete failure under heat, a blinking engine check light combined with the airbag light, or a non‑functioning clock on the vehicle display. These symptoms suggest an advanced defect within the control unit.

In which vehicles is the G4959-10000 control unit installed?

This airbag control unit is specifically designed for the third generation of the Hyundai i30 PD model series and its facelifts, covering production years from 2017 to the present. At Airbag24, we offer expert repairs for all variants of this model equipped with part number G4959-10000.

At Airbag24, we repair part number G4959-10000 for the following Hyundai models:

Hyundai i30 (PD) | Model years 2017–2020

Hyundai i30 (PD 1st Facelift) | Model years 2020–2024

Hyundai i30 (PD 2nd Facelift) | From model year 2024 onward

Part number G4959-10000 is also directly interchangeable and compatible with the alternative OEM number 95910-G4000.

How is the G4959-10000 professionally repaired?

The repair is a purely electronic process that does not involve replacing the unit. After removal, the control unit is sent to Airbag24, where stored crash data is erased at the chip level and the software is reset to restore full functionality. Once reinstalled, the device is fully operational again.

The process begins in your workshop with the proper removal of the airbag control unit from the vehicle. It is essential to perform this step without power and according to the manufacturer’s specifications to prevent further damage.

Next, you send the securely packaged control unit along with the completed repair form to Airbag24. At our facility, the unit undergoes an incoming inspection to verify the reported fault. The core of the repair involves lifting the internal lockout and resetting the software to its factory settings.

Following successful restoration and final testing, the control unit is returned to you. All that remains is to reinstall it in the vehicle and clear the vehicle’s overall fault memory. We provide a 12-month warranty on all repairs.

Is Repairing the G4959-10000 Worth It?

Yes, repair is the most economical and sustainable solution. You can save up to 90% compared to purchasing a new part, which, according to the manufacturer, may cost as much as €750. Additionally, the original vehicle coding is preserved, eliminating the need for time-consuming reprogramming after installation.

The financial advantage is the decisive factor. Rather than investing in an expensive new component, repair allows you to restore the original part at a fraction of the price, significantly easing the vehicle owner’s budget.

An additional technical benefit is that the repaired control unit is plug-and-play. Since the vehicle’s original software and coding remain intact, there is no need for the complex and often error-prone procedure of teaching a new control unit to the vehicle.

Furthermore, you receive a 12-month warranty on the completed repair, providing the same level of assurance as a replacement part—but with substantial cost savings.

What Shipping Options Does Airbag24 Offer?

Airbag24 provides a flexible and customer-friendly shipping process. You can either ship your defective control unit yourself at no charge or arrange a convenient UPS pickup from your preferred location. For return shipments, we offer free standard and faster express options, including cash-on-delivery.

For sending your unit to us, you have two convenient choices: You can mail the package yourself—this service is free—or you can schedule a pickup directly from your location through our logistics partner, UPS.

After successful repair, you can select from several return shipping options:

The free UPS standard shipping is our default option. For quicker delivery, you can choose UPS express shipping. Both options are also available combined with cash-on-delivery. Of course, you can also pick up your repaired unit in person at our facility.