Airbag control unit with part number K8820-4HL0A

What is the function of the Airbag Control Unit K8820-4HL0A?

The airbag control unit with part number K8820-4HL0A, also known as the Airbag Control Unit, is the central control module for the occupant protection system. It was specifically designed for use in the Infiniti Q50 V37 series and continuously monitors all safety‑related components.

The primary task of this device is to process signals from various crash and acceleration sensors in the vehicle. In the event of a collision, the control unit determines within milliseconds whether and which restraint systems—such as airbags and seatbelt pretensioners—should be deployed to provide optimal protection for occupants.

It acts as the brain of the passive safety system and is crucial for its proper functioning. Therefore, flawless operation is essential for vehicle safety.

Why does the control unit K8820-4HL0A fail?

The most common cause of a perceived failure is the storage of crash data after an accident or collision. Additional defects may arise from internal electronic malfunctions, communication issues, water ingress, or mechanical damage to cables and connectors. Another verified OEM part number for this component is 988206HE0A.

Following a crash, the control unit deliberately locks itself by permanently storing the crash data in its memory. This is a manufacturer‑imposed safety measure to prevent reuse without professional inspection and reset.

External factors such as moisture from water ingress can also lead to corrosion on the circuit board, resulting in internal faults. Similarly, broken or crushed cables can disrupt communication even if the control unit itself remains intact. A thorough diagnosis is therefore critical.

How do you recognize a defect in the control unit K8820-4HL0A?

The clearest symptom is a continuously illuminated airbag warning light on the instrument cluster. Often, communication via the OBD interface with the control unit also becomes impossible, making it impossible to read fault codes. Stored crash data is another clear indication.

The airbag warning light that fails to turn off after starting the engine indicates a fault in the restraint system. In this state, the system is typically non‑functional, posing a significant safety risk.

When workshops attempt to read the fault memory, the connection to the airbag control unit fails—the device does not respond to diagnostic requests. In cases where communication is still possible, fault codes are often stored, pointing to an internal malfunction or saved collision data.

In which vehicles is the control unit K8820-4HL0A installed?

This control unit is primarily installed in the Infiniti Q50 V37 series, produced between 2013 and 2024. This includes specific variants such as the Infiniti Red Sport Q50 and the Infiniti Sport Q50S. Airbag24 offers professional, cost‑effective repair services for these models.

At Airbag24, we repair the control unit with part number K8820-4HL0A and the alternative OEM number 988206HE0A for the following Nissan‑platform‑based models:

- Infiniti Q50 (V37 series, model years 2013–2024)

- Infiniti Red Sport Q50

- Infiniti Sport Q50S

How is the repair of the control unit K8820-4HL0A carried out?

Professional repair involves diagnosing the fault, eliminating the root cause—such as clearing crash data or repairing electronics—and performing a final functional test. At Airbag24, we restore full functionality and provide a 12‑month warranty on the work performed.

Before removing the control unit, it is recommended to read the fault memory and document any error codes. The removed component is then sent to Airbag24, accompanied by a completed RMA form to facilitate quick assignment.

Our technicians conduct a detailed analysis. Resetting the crash data is often at the heart of the repair process. Using specialized software, accident data is erased, returning the device to its factory settings. For internal electronic faults, defective components are replaced professionally.

After successful restoration, the control unit is tested on a bench to ensure flawless operation. It can then be reinstalled in the vehicle while preserving the original vehicle coding.

What shipping options are available?

To ensure smooth processing, you can send your defective control unit to Airbag24 free of charge or arrange convenient UPS pickup from your preferred location. Return shipping is provided free of charge via standard UPS service. Express, cash‑on‑delivery, and self‑pickup options are also available.

For the outbound shipment, you have a choice: you can ship the package yourself or use our UPS pickup service. Alternatively, you can drop off the item in person at our workshop.

For the return shipment of your repaired control unit, we offer the following options:

- UPS Standard Shipping (free)

- UPS Express Shipping

- UPS Standard Shipping with Cash on Delivery

- UPS Express Shipping with Cash on Delivery

- In-person collection at our location