Airbag control unit with part number MR460758

What is the function of the airbag control unit MR460758?

The airbag control unit with part number MR460758 is the central control module for the Supplemental Restraint System (SRS) in the Mitsubishi Pajero Sport K90 (model years 1996–2008). It monitors all safety‑related components, such as airbags, seatbelt pretensioners, and crash sensors; processes their data; and, in the event of a collision, precisely deploys the restraint systems. Additionally, it permanently stores irreversible crash data after an impact.

As the “brain” of the passive safety system, the SRS module MR460758 interprets signals from the vehicle’s distributed acceleration sensors in real time. When a collision exceeds predefined thresholds, the control unit sends ignition pulses to the appropriate airbags—driver, passenger, knee, or seat‑mounted—and to the seatbelt pretensioner systems.

An additional critical function is storing crash data in its internal memory. After an accident, this data is permanently retained, locking the system and preventing reactivation without professional intervention. This security measure ensures that the entire system is thoroughly inspected following a crash.

Why does the airbag control unit MR460758 fail?

The most common cause of failure for the MR460758 control unit is the retention of crash data after a collision, which permanently locks the system and triggers the SRS warning light. In addition, internal electronic faults caused by aging or vibration can lead to malfunctions. These include defective components such as processors and capacitors, or damaged solder joints on the circuit board.

The primary reason for repair is the presence of crash data, often indicated by error code B1310. Even if the hardware itself remains undamaged, this stored data completely disables the control unit’s functionality. Clearing this data is a key step in the repair process, restoring the system to operational readiness.

Besides crash‑data lockout, purely electronic failures may also occur. Vibration during driving or component aging can result in cold solder joints or the failure of microprocessors and capacitors. Errors like code B1402, indicating a ground fault in the driver‑airbag circuit, can likewise point to an internal defect within the control unit.

However, it is essential to rule out external causes before disassembling the unit. Broken wiring, incorrect connections, or loose plug‑ins can produce similar symptoms. A professional diagnosis at a workshop is therefore recommended to confirm whether the issue truly lies within the control unit.

How do you recognize a defect in the MR460758 control unit?

A defect in the MR460758 airbag control unit primarily manifests as a continuously illuminated or flashing SRS warning light on the Mitsubishi Pajero’s dashboard. Often, communication with the control unit via a diagnostic tool becomes impossible, complicating troubleshooting. In some cases, specific errors—such as those related to side‑impact sensors—are reported.

The clearest indication is the activated SRS warning light, signaling that the restraint system is non‑functional and that airbags would not deploy in the event of a crash. The light may remain steadily on or flash intermittently.

Another clear symptom is complete loss of communication. If a workshop attempts to read the fault memory, the diagnostic device receives no response from the SRS module, strongly suggesting a severe internal malfunction of the control unit.

Specifically for the Pajero, owners also report occasionally illuminating warning lights or error messages referring to side‑impact sensors—even when those sensors are functioning properly. Even without an actual crash, symptoms such as falsely triggered airbags or faulty seatbelts may appear, pointing to an internal electronic fault.

In which vehicles is the MR460758 control unit installed?

The airbag control unit with part number MR460758 is specifically designed for the Mitsubishi Pajero Sport model series K90. This model was produced from 1996 to 2008. At Airbag24, we specialize in repairing precisely this control unit for the Pajero Sport.

Repair services at Airbag24 are available for the following model:

Mitsubishi Pajero Sport K90 (model years 1996–2008)

Is repairing the MR460758 worthwhile?

Repairing the MR460758 airbag control unit is a highly cost‑effective alternative to purchasing a new unit. Savings typically range from 30% to 50% compared to a brand‑new part, potentially amounting to up to €800. Moreover, a repaired unit is plug‑and‑play and requires no complex reprogramming.

The financial advantage is substantial. While a new part entails high costs, repair restores full functionality at a fraction of the price, making it the preferred solution for workshops and vehicle owners.

Another key benefit is that the repaired original control unit remains vehicle-specific. It requires no re-coding or re-learning to the vehicle, saving both workshop time and expenses. After repair, it can be simply reinstalled and works immediately (plug-and-play).

How does the repair of control unit MR460758 proceed?

Upon submission to Airbag24, control unit MR460758 undergoes a systematic repair process. First, an in-depth electronic analysis identifies faults. Stored crash data is then erased, and defective components such as processors or capacitors are professionally replaced. Final tests on a test bench ensure full functionality.

The process at Airbag24 begins with receipt and documentation of the control unit. Our technicians perform a comprehensive diagnosis to pinpoint the exact cause of the fault—whether it’s blockage caused by crash data or a hardware defect on the circuit board.

In the next step, repairs are carried out at the component level. Stored crash data is professionally reset, and any faulty electronic parts are identified and replaced with new, high-quality components. This includes precise soldering work on processors, memory modules, or other critical elements.

Following restoration, the control unit undergoes rigorous quality control. On a specially designed test bench, all functions are simulated and tested to guarantee flawless communication and activation logic. We provide a 12-month warranty on every repair.

What shipping options does Airbag24 offer?

You can either deliver your control unit to us free of charge or conveniently arrange for UPS to pick it up from your chosen location. For return shipping after repair, Airbag24 offers several options: free standard UPS shipping, faster UPS Express shipping, and both methods available with cash-on-delivery. Self-collection is also possible.

For outbound shipping, you have the choice: you can send the removed control unit to us yourself or use UPS’s convenient pickup service. This can be scheduled for any weekday at your preferred address—such as a workshop or home.

After successful repair, return shipping is handled using your selected method. Standard UPS shipping is free of charge. If you require expedited delivery, various express options are available for an additional fee. Cash-on-delivery is also accepted for both standard and express shipments.