Airbag control unit with part number MR587732

What is the function of the airbag control unit MR587732?

The airbag control unit with part number MR587732 is the central control module of the Supplemental Restraint System (SRS) in various generations of the Mitsubishi Outlander. It processes signals from the connected crash sensors to precisely deploy airbags and seatbelt pretensioners at the right moment in the event of a collision.

As an original control unit, it is responsible for managing all safety‑related restraint functions. Its task is to continuously monitor system components and, in the event of a collision, maximize occupant survivability by activating passive safety systems.

The MR587732 is specifically designed for Mitsubishi Outlander model series CU (from 2001), CW, GF, and GG, ensuring proper operation of the entire airbag system in these vehicles.

Why does the airbag control unit MR587732 fail?

The most common cause of failure for the MR587732 is the storage of crash data after an accident, which locks the unit internally and prevents further functionality. Other causes include electronic defects due to aging, overvoltage damage, or faulty components that lead to internal malfunctions and communication issues.

After an airbag deployment—even in minor collisions—irreversible crash data remains stored in the control unit’s memory. While this safeguard ensures safety, it renders the device unusable without professional repair. Simply clearing the fault memory is no longer sufficient.

Another frequent defect is an internal hardware failure, indicated by error code B1111 (“control unit defective”). This can result from damaged components such as capacitors or memory chips on the circuit board, making the unit inaccessible via the OBD interface.

Additionally, issues like excessive resistance in the airbag circuits or damage caused by prolonged vehicle inactivity can impair the MR587732’s electronics and trigger a failure.

How do you recognize a defective MR587732 control unit?

A defect in the MR587732 primarily manifests as a permanently illuminated airbag warning light (SRS lamp) that cannot be cleared even with a diagnostic tool. Often, communication with the control unit via the OBD interface is no longer possible, or error messages such as “control unit defective” or “refer to manual” appear on the display.

The most obvious symptom is the persistently lit SRS warning light in the instrument cluster. It fails to extinguish after starting the engine, indicating a serious, stored fault within the system.

Another clear sign is when a workshop using a diagnostic tool cannot access the airbag control unit. The lack of communication prevents reading or clearing fault codes, confirming an internal malfunction of the module.

Even after replacing deployed airbags or seatbelt pretensioners, the fault persists because the crash data stored in the control unit blocks reactivation of the system.

In which Mitsubishi models is the MR587732 installed?

The airbag control unit with part number MR587732 is specifically fitted in various generations of the Mitsubishi Outlander. These include model series CU, CW, GF, and GG, spanning a long production period from 2001 through 2018 and beyond, and professionally repaired by Airbag24.

At Airbag24, the MR587732 control unit is refurbished for the following Mitsubishi Outlander model series:

Mitsubishi Outlander CU (model years 2001–2006)

Mitsubishi Outlander CW (model years 2006–2010) and CW facelift (2010–2012)

Mitsubishi Outlander GF (model years 2012–2015), GF first facelift (2015–2018), and GF second facelift (from 2018 onward)

Mitsubishi Outlander GG

How is the MR587732 professionally repaired at Airbag24?

At Airbag24, the MR587732 control unit undergoes professional refurbishment. Upon receipt, a thorough diagnosis identifies the specific issue. Stored crash data is then erased, defective electronic components are replaced, and the unit is reprogrammed if necessary, followed by a final functional test to validate the repair.

The repair process at Airbag24 follows established procedures to restore full functionality to the control unit. It is recommended to have a diagnosis performed at a specialized workshop before removal, to rule out other potential sources of trouble in the vehicle.

Once the control unit arrives, a detailed analysis is conducted. Technicians check whether crash data is stored or if there is an internal hardware defect. Subsequently, crash data is completely reset electronically, unlocking the unit.

For hardware defects, faulty components such as capacitors or memory chips are expertly replaced. If necessary, the unit is reprogrammed and the vehicle-specific coding (VIN) is adjusted to ensure compatibility. A final test guarantees proper functionality, backed by a 12-month warranty.

Is Repairing the MR587732 Worth It?

Yes, repairing the MR587732 is an economically and technically sensible alternative to purchasing a new unit. Compared to a new part, which often costs between 400 and 800 euros, you save significantly. Moreover, the repaired control unit is immediately ready for use, and you receive a 12-month warranty on the repair.

A new OEM control unit is not only expensive but often requires time-consuming vehicle‑specific coding. At Airbag24, our repair service offers a plug-and-play solution: the refurbished unit is simply reinstalled and operates without additional programming, saving both time and extra workshop expenses.

By precisely restoring the electronics, the original functionality of the component is fully reinstated. This approach is not only more sustainable but also ensures the exact fit and compatibility that only an original part can provide.

What Shipping Options Are Available for Repairs?

For your control unit repair with Airbag24, you can either ship the part yourself at no cost or arrange a convenient UPS pickup from your preferred location. For return shipping, free standard and faster express options are available, including cash-on-delivery. Self‑pickup is also an option.

For sending the unit to us, you have two convenient choices: pack it yourself and send it free of charge, or use the paid UPS pickup service, which collects the package directly from your home or workshop.

Once the repair is complete, the control unit will be returned to you as quickly as possible. You can choose between free UPS standard shipping and faster UPS express delivery—both options are also available with cash-on-delivery. Alternatively, you may pick up the repaired unit in person at our facility.