What is a Hyundai Grandeur TG airbag control unit?
The Hyundai Grandeur TG airbag control unit is the central safety unit in the vehicle, precisely activating all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of a collision. It continuously monitors sensors, stores relevant crash data, and ensures the proper functioning of all airbag modules for maximum safety.
This essential module is an integral part of your Hyundai Grandeur TG's Supplemental Restraint System (SRS). It receives signals from crash sensors and decides on the necessary activation measures in milliseconds.
A permanent self-diagnosis of the system ensures functionality and warns of errors by illuminating an airbag warning light in the dashboard.
Why is the Hyundai Grandeur TG airbag control unit defective?
A Hyundai Grandeur TG airbag control unit can be defective because it irreversibly stores crash data after an accident, or because internal components fail due to age. This stored crash data prevents further deployments and requires a complex Hyundai Grandeur TG airbag control unit repair or module replacement.
After the airbag system is deployed, the control unit is "used up" and must either be replaced or reset using special reprogramming.
Even without an accident, a defect can occur due to overvoltage, short circuits or age-related wear of electronic components, which impairs vehicle safety.
Common error codes for Hyundai Grandeur TG airbag control unit repair
When diagnosing the Hyundai Grandeur TG airbag control unit repair, specific B-codes may occur that indicate problems with the control unit itself, rather than with sensors or seatbelt pretensioners. These codes require professional review and repair.
- B1000 → Control unit communication error → Communication problem with the airbag control unit.
- B1346 → Driver airbag resistance too high 1st stage → Error in the resistance of the driver airbag, measured by the control unit.
- B1481 → Driver airbag resistance too high 2nd stage → Error in the resistance of the driver airbag, measured by the control unit.
- B2501 → Airbag lamp open circuit / control unit error → Malfunction or open circuit in the airbag ECU system.
These error codes are critical because they can result in the deactivation of the entire airbag system and require immediate Hyundai Grandeur TG airbag control unit repair.
Correcting these specific errors will ensure that your vehicle's occupant protection system regains full functionality.
What part numbers are available for the Hyundai Grandeur TG airbag control unit repair?
For Hyundai Grandeur TG airbag control unit repairs, the original OEM part numbers 95910-17600 and 95910-G8300 are primarily relevant, as they are confirmed to be 100% accurate for the Hyundai Grandeur TG model. Additionally, the OEM number 96831-28000 is suitable for certain variants.
These part numbers are crucial for selecting the correct replacement part or performing a professional Hyundai Grandeur TG airbag control unit repair.
- 95910-17600 → Hyundai → Original OEM
- 95910-G8300 → Hyundai → Original OEM
- 96831-28000 → Hyundai → Original OEM
Compatibility should always be verified using the exact vehicle data and the existing control unit number to ensure functionality.