Volkswagen Tayron airbag control unit repair⁽¹⁾

What should I pay attention to with Volkswagen Tayron airbag control units?

The airbag control unit in the Volkswagen Tayron evaluates the signals from the crash sensors, triggers the airbags and belt tensioners, and monitors the entire airbag system. If it detects a fault, the airbag warning light comes on. After an accident, the control unit stores crash data and locks itself.

The airbag system is safety-relevant. Work on it should only be carried out by a specialist workshop, not by the vehicle owner. A control unit with a fault or stored crash data requires a professional inspection before the system works correctly again.

Airbag24 repairs the control unit that the customer sends in. The crash data is erased, the unit is inspected, repaired and then tested.

Which Volkswagen Tayron generations are there?

At Airbag24, the Volkswagen Tayron is currently listed in one generation: the 1st generation, built since 2025. Which control unit is fitted depends on model year and equipment.

The 1st generation is the current model series of the Volkswagen Tayron. Within this series, model year and equipment can determine the control unit variant, so it is worth checking the label.

• 1st generation (since 2025) – current model series, still in production.

How do I identify my Volkswagen Tayron airbag control unit?

The part number on the label of the control unit determines the exact version. Together with the model year and equipment of your vehicle, it allows the matching unit to be clearly identified. The vehicle identification number (VIN) helps with this assignment.

Compare the model year and equipment of your Tayron with the details on the label before you create a repair order. This shows early whether the unit you send in matches the vehicle.

The following fault codes are recorded for this model as examples:

• 00595: crash data stored, the control unit has detected an impact
• 01226: crash data stored, airbag driver side
• 00588: driver airbag squib, resistance outside range or short circuit
• 00532: supply voltage B+ outside the permitted range

A single fault code does not yet prove that the control unit is defective. Only reading out the fault memory and inspecting the unit will show the cause.

What airbag equipment does the Volkswagen Tayron have?

According to manufacturer information, the standard equipment of the Volkswagen Tayron includes front airbags for driver and front passenger, side airbags at the front and rear, head airbags at the front and rear, and a center airbag between the front seats. The exact number of airbags depends on the trim level and market.

The control unit coordinates these modules in a crash and decides which airbags and belt tensioners are triggered. A defective control unit can disrupt the interaction of the entire system; the airbag warning light is then often the first visible sign.

The route to repair works as follows: the fault memory is read out. A specialist workshop then disconnects the battery and removes the control unit. You then create a repair order online and send the unit, well packed, to Airbag24. Processing usually takes 3–4 working days (checking, repairing, testing). Whether a particular unit can be repaired only becomes clear after inspection. The repaired control unit comes back with all vehicle data and is ready for use immediately after refitting — no coding or programming is necessary.