Airbag control unit with part number 4H0959655H

What is the function of the airbag control unit 4H0959655H?

The airbag control unit 4H0959655H, manufactured by Bosch, serves as the central control module for the passive safety systems in Audi A6 C7 4G models. It analyzes data from crash sensors, deploys airbags and seatbelt pretensioners in the event of a collision, stores relevant crash data, and communicates with the vehicle’s electronic systems. An internal defect results in deactivation of the entire system.

As the heart of the restraint system, the control unit 4H0959655H continuously monitors all connected components, including front, side, and head airbags, seatbelt pretensioners, and their associated impact and acceleration sensors.

In the event of a collision, the unit’s electronics determine within milliseconds which restraint devices need to be activated. Simultaneously, accident data—known as crash data—is securely stored in an internal memory, often leading to a system lockout after an accident.

Why does the control unit 4H0959655H fail?

A failure of the control unit 4H0959655H is most commonly caused by stored crash data following an accident, which locks the system. Other causes include internal hardware defects in the electronics, self-test errors, or software malfunctions that result in permanent, non‑erasable entries such as error code 65535 (control unit defective).

The primary cause of malfunction is the storage of crash data. After a triggering event, the control unit blocks further operation for safety reasons, even if no visible damage is present on the vehicle. This lockout can only be lifted through specialized repair services.

Hardware defects are another frequent source of failure. Issues with electronic components like processors or capacitors, as well as undervoltage problems, can lead to complete system failure. These often manifest as VAG‑specific error code 65535, indicating an irreversible internal defect.

Rarely, software or communication errors may occur, preventing interaction with diagnostic tools or causing sporadic error messages. However, these are usually secondary to the aforementioned hardware issues.

How do you recognize a defect in the 4H0959655H?

A defective airbag control unit 4H0959655H unmistakably shows itself through a permanently illuminated airbag warning light on the instrument cluster. Additionally, typical error codes such as 65535 or 00106 (“control unit defective”) are stored in the fault memory. Another clear indication is when the control unit becomes unreachable via diagnostic tools like VCDS or ODIS.

The most obvious symptom is the active airbag warning light, which fails to extinguish after starting the vehicle, signaling a serious malfunction in the safety system—a condition that will result in a significant deficiency during the next mandatory inspection.

During diagnostics, specific error codes are read out, directly pointing to the control unit. Codes 65535 or 00106 are classic indicators in VAG vehicles of an internal, irreparable device defect from the manufacturer’s perspective.

A severe symptom is complete loss of communication. If a workshop attempts to read the fault memory, the control unit no longer responds to diagnostic requests, rendering the system inaccessible to standard diagnostics.

In which vehicles is the 4H0959655H installed?

The airbag control unit with part number 4H0959655H is used in Audi vehicles. It is primarily found in the Audi A6 model series of generation C7, encompassing both pre‑facelift and facelift versions produced between approximately 2010 and 2018.

At Airbag24, we repair the control unit 4H0959655H for the following specific Audi A6 model variants:

Audi A6 C7 4G (model years 2010–2014)

Audi A6 C7 4G Facelift (model years 2014–2018)

It is crucial to carefully verify the part number before removal to ensure compatibility, as different variants may be installed within the same model series.

Is repairing the 4H0959655H worthwhile?

Repairing the airbag control unit 4H0959655H is an economically and technically superior alternative to purchasing a new unit. You can save up to 70% compared to a new part, which typically costs between 300 and 1,000 euros. Additionally, there is no need for expensive re‑coding, and the repair comes with a 12‑month warranty.

The cost advantage is substantial. According to market analyses, a new factory‑original control unit often ranges from 300 to 1,000 euros, plus installation fees and complex programming at a specialized workshop. Repairing it is significantly more affordable.

Another key advantage is preserving the vehicle’s original coding. The repaired control unit is simply reinstalled and ready to use right away. This plug-and-play approach saves time and avoids additional workshop costs.

Moreover, repair is a sustainable solution, as it enables the reuse of high-quality electronic components, thereby helping to reduce e-waste. With a 12-month warranty on the work performed, you take no risks.

How does the repair of the 4H0959655H proceed?

Professional repair at Airbag24 begins with an incoming inspection, where the exact fault is analyzed. Stored crash data is then erased, and, if necessary, defective hardware components are replaced. Following a successful functional test, the original vehicle coding remains intact, and you receive a 12-month warranty on the completed repair.

For a targeted repair, it is advisable to read out the fault memory before removing the control unit and document the error codes. After removal, the device is securely packaged and sent to Airbag24.

At Airbag24, repairs follow a standardized process. First, the unit undergoes a thorough analysis, focusing on eliminating the root cause—whether that involves erasing crash data using specialized software or repairing electronics at the component level.

Following repair, the control unit is tested on a test bench to ensure full functionality. Since the vehicle-specific coding is retained, the unit is typically ready for immediate use (“plug-and-play”) after installation, without requiring costly reprogramming by the manufacturer.

What shipping options does Airbag24 offer?

Airbag24 provides flexible and secure shipping options. You can send your control unit yourself at no cost, or arrange a convenient UPS pickup. Return shipping is standardly free via UPS Standard. For urgent cases, express and cash-on-delivery options are also available.

For outbound shipping, you have two simple choices: either pack the component securely and ship it yourself, or use the convenient UPS pickup service, which collects the package directly from your preferred location.

For returning your repaired control unit, the following options are available:

The free UPS Standard shipping (delivery in 1–3 business days) is our standard option.

For faster delivery, you can choose UPS Express shipping (delivery in 1–2 business days).

Both Standard and Express shipping can optionally be combined with cash-on-delivery. Alternatively, personal collection on-site is also possible.