Airbag control unit with part number 89170-0C050

What is the function of the airbag control unit 89170-0C050?

The part number 89170-0C050 refers to an airbag control unit, also known as the SRS Control Module or Air Bag Sensor Assembly, which serves as the central control unit for the passive safety systems in the Toyota Tundra K30 (2007–2021). Its primary task is to process crash sensor data and trigger the airbags and seatbelt pretensioners with precise, split-second timing during a collision.

As an original Toyota OEM part, this module is deeply integrated into the vehicle’s electronics. It continuously monitors all components of the restraint system—from the impact sensors at the front and sides to the individual airbag modules and seatbelt pretensioners. Only a fully functioning control unit can ensure complete occupant protection.

Why does the control unit 89170-0C050 fail?

Failures in the 89170-0C050 control unit often arise from stored crash data after an accident, which prevents the module from operating correctly. Other causes include internal hardware malfunctions due to thermal stress, moisture ingress, or failure of electronic components—such as a short circuit to ground that triggers error code B1630.

The most common cause of failure is the storage of crash data. After airbags or seatbelt pretensioners have deployed, the control unit locks itself for safety reasons and must be professionally reset. Simply clearing the fault memory using a diagnostic tool is not sufficient in such cases.

Hardware defects on the circuit board are also prevalent. Aging, vibrations, or moisture can lead to microscopic cracks in solder joints or the failure of individual components. Similar part numbers, such as 89170-0D100, often exhibit identical fault patterns, indicating shared design features.

How do you recognize a defect in the 89170-0C050?

The clearest symptom of a malfunctioning 89170-0C050 control unit is a permanently illuminated or flickering airbag warning light on the instrument cluster. Often, the module can no longer be accessed by a diagnostic tool (OBD-II) because stored crash data blocks communication.

In many cases, the control unit refuses to communicate with external diagnostic equipment. Workshops are then unable to read fault codes or perform system checks, making diagnosis challenging but clearly pointing to an internal blockage or hardware failure within the module.

In addition, specific error messages may appear, indicating a defective passenger airbag, seat airbag, or issues with the crash sensors. In rarer instances, unusual electrical phenomena have been observed, such as the dashboard illumination failing when the vehicle is locked.

In which vehicles is the 89170-0C050 installed?

The airbag control unit with part number 89170-0C050 is primarily specified for the Toyota Tundra of the K30 generation, manufactured from 2007 to 2021. Although some sources suggest different specifications for earlier model years, the main application remains this particular series. For exact identification, it is always advisable to cross-check with the Vehicle Identification Number (VIN).

At Airbag24, we repair the airbag control unit with part number 89170-0C050 for the following model:

Toyota Tundra K30 (2007–2021)

Due to overlaps and regional variations, the safest way to confirm compatibility is to verify the part number directly on the removed unit or via the vehicle’s VIN.

How is the 89170-0C050 control unit professionally repaired?

After being sent to Airbag24, the control unit undergoes a standardized repair process. First, an initial inspection and diagnosis pinpoint the root cause of the issue. Next, stored crash data is erased, and any defective electronic components on the circuit board are replaced. Following a final test, the unit is returned as a plug-and-play component with a 12-month warranty.

The process begins in the workshop with the proper removal of the control unit. Ideally, it should be reinstalled last, after all other components—such as airbags, sensors, and seatbelt pretensioners—have been installed.

The focus of the repair is on addressing the actual underlying cause, including safely erasing crash data from the internal memory and repairing hardware defects. Thanks to the restoration of the original device, the vehicle-specific coding remains intact, eliminating the need for time-consuming reprogramming after installation.

What shipping options are available?

For sending your defective control unit to Airbag24, you can pack and ship it yourself or arrange a convenient UPS pickup at your preferred location. For returning the repaired unit, you have the choice of free standard UPS shipping, faster UPS Express shipping, or both options with cash-on-delivery. On-site self-collection is also available.

For the outbound shipment, you can choose: either send the package to us yourself or use our UPS pickup service directly at your home or workshop.

After the repair is completed, you can select from several return shipping options: free standard UPS shipping, UPS Express shipping, standard UPS shipping with cash-on-delivery, or UPS Express shipping with cash-on-delivery.