Airbag control unit with part number 95910-07200

What is the function of the airbag control unit 95910-07200?

The airbag control unit with part number 95910-07200 is the central control unit (SRS ECU) for the entire occupant protection system in the second-generation Kia Picanto (TA, 2011–2017). It processes data from acceleration and crash sensors and determines whether and when airbags and seatbelt pretensioners should be deployed. A malfunction in this unit disables the entire safety system and results in failure during the main vehicle inspection (TÜV).

As an original OEM component, this module is precisely matched to the vehicle architecture of the Kia Picanto TA. It continuously communicates with the satellite sensors located at the front and sides of the vehicle, as well as with the seatbelt pretensioners and various airbag modules, including driver, passenger, and possibly knee airbags.

Its primary task is to respond to accident scenarios within milliseconds. Based on incoming sensor data, it calculates the severity of the impact and activates the appropriate restraint systems to provide optimal protection for occupants. Therefore, flawless operation is critical for vehicle safety.

Why does the control unit 95910-07200 fail?

The most common reason for repairing the control unit 95910-07200 is the permanent storage of crash data after an accident, even in minor collisions. In addition, internal defects in electronic components on the circuit board or damage caused by moisture can lead to complete device failure, even without an actual crash.

After airbags or seatbelt pretensioners have been deployed, the control unit locks itself for safety reasons. These internal crash records cannot be erased using conventional diagnostic tools and require reprogramming at the chip level. This condition is often logged as an internal fault in the error memory.

Electronic malfunctions are also a frequent cause. Defective components on the circuit board or cold solder joints can disrupt functionality. In some cases, environmental factors such as moisture ingress due to water damage inside the vehicle can result in corrosion and short circuits within the control unit.

There are related part numbers for the Kia Picanto that offer similar functions, including 95910-07100, 95910-1Y110, 95910-1V110, 5WK44333, and 95910-1Y610. For non‑standard part numbers, compatibility verification is recommended.

How do you recognize a defect in the 95910-07200?

The clearest indication of a defect in the control unit 95910-07200 is the permanently illuminated airbag warning light (SRS lamp) in the instrument cluster. Often, communication with the control unit via the OBD2 interface also becomes impossible, making diagnostics at a workshop unfeasible.

The airbag warning light typically remains lit for about 30 seconds after starting the engine and does not turn off. This signals to the driver that the entire restraint system is disabled and will not function in the event of an accident.

Another clear symptom is the refusal to communicate. If the diagnostic tool reports that the control unit is unresponsive, this strongly suggests an internal module failure. Likewise, implausible or non‑erasable error codes pointing to an internal device fault or stored crash data are reliable indicators.

In rarer cases, accompanying symptoms may appear, such as a flashing engine check light, missing display of the vehicle identification number in the diagnostic system, or failure of the speedometer if these systems are connected through the airbag control unit.

In which models is the 95910-07200 installed?

The airbag control unit with part number 95910-07200 was specifically developed as an original part for the second-generation Kia Picanto. This model series is known internally as TA and was produced from 2011 to 2017. Repairs are available for all variants of this model.

At Airbag24, refurbishing this control unit for the following vehicle model is a well-established service:

Kia Picanto TA (model years 2011–2017)

Due to its specific hardware and software configuration, this control unit cannot be easily used in other vehicle models or brands.

How does repair work at Airbag24?

Repairing the control unit 95910-07200 at Airbag24 is a precise, multi‑step process. After removal and shipment of the unit, an initial thorough analysis is performed to identify the root cause—whether it’s crash data or a hardware defect. Subsequently, crash records are cleared and defective components replaced. We provide a 12‑month warranty on successful repairs.

Before removal, it is recommended to have a diagnostic check performed at a specialized workshop to rule out other potential sources of trouble in the vehicle (e.g., faulty sensors or cables). Ideally, please include a copy of the diagnostic report and a brief description of the fault with your control unit.

Upon receipt at Airbag24, our technicians will conduct an initial inspection. At the heart of the repair process is reprogramming the internal memory to erase crash data. If additional hardware defects are detected on the circuit board, the affected electronic components will be professionally replaced.

Following completion of the repair, a comprehensive final test is carried out to ensure full functionality of the control unit. After reinstalling the unit in the vehicle, in some cases the system’s error memory must be cleared once to extinguish the airbag warning light.

What shipping options are available?

Airbag24 offers maximum flexibility for shipping. You can either send your defective control unit back to us free of charge yourself, or arrange a convenient UPS pickup at a location of your choice. For return shipping, you have the option of free standard UPS delivery or faster UPS Express delivery—both also available with cash-on-delivery.

For outbound shipping, you have two convenient options: either securely package the removed control unit and ship it to us yourself, or use the UPS pickup service, where a courier collects the package directly from your location.

For return shipping after successful repair, you can choose from the following options:

Free standard UPS delivery (1–3 business days)

UPS Express delivery (1–2 business days)

Standard UPS delivery with cash-on-delivery

Express UPS delivery with cash-on-delivery

Of course, you may also pick up your repaired control unit in person at our facility.