Airbag control unit with part number 95910-2J400

What is the function of Airbag Control Unit 95910-2J400?

The airbag control unit with part number 95910-2J400 is the central control module for the occupant protection system in the Kia Mohave HM. It processes data from acceleration sensors to precisely deploy the airbags and seatbelt pretensioners at the right moment in the event of a crash, thereby ensuring the safety of vehicle occupants.

As an Airbag Control Unit (ACU) or ECU (Electronic Control Unit), it is responsible for monitoring all safety‑related components of the restraint system. This includes front and side airbags, seatbelt pretensioner systems, as well as the crash sensors distributed throughout the vehicle.

Proper functioning of this control unit is critical, as it activates life‑saving restraint systems upon impact. After a collision, the unit stores crash data, which results in a system lockout.

Why does control unit 95910-2J400 fail?

The most common cause of failure for control unit 95910-2J400 is the storage of crash data after an accident, triggering an internal lockout. Other defects arise from internal electronic faults, indicated by error code B1000, requiring component‑level repair to restore full functionality.

Following a collision—even minor ones—the so‑called crash data remains permanently stored in the control unit’s memory. This lockout prevents re‑activation and must be removed through professional resetting to return the system to operational status.

Another significant defect is the “internal fault,” often reported as error code B1000. This indicates a malfunction of internal components such as capacitors, sensors, or memory chips, causing the control unit to operate improperly.

It is important to note that similar part numbers like 95910-2J450, 95910-2J550, and 95910-2J580 may also be affected by the same issues. These numbers are considered interchangeable and are taken into account during repairs.

How can you recognize a defect in control unit 95910-2J400?

A defect in airbag control unit 95910-2J400 primarily manifests as a continuously illuminated or flashing airbag warning light on the instrument cluster. Often, the unit can no longer be accessed by diagnostic equipment, and stored error codes such as B1000 cannot be cleared.

The most noticeable sign is the active airbag warning light, indicating to the driver that the entire vehicle restraint system is non‑functional and would not deploy in the event of a crash.

Another clear symptom is the lack of communication: workshops find they cannot establish a connection to the airbag control unit during diagnostics, making precise fault analysis via the OBD port impossible.

In some cases, additional warning indicators may appear, including a flashing engine check light or a display message instructing the driver to consult the vehicle manual—signs that underscore the severity of the issue.

In which vehicles is 95910-2J400 installed?

The airbag control unit with part number 95910-2J400 is specifically designed for the Kia Mohave HM model series, produced from 2008 to 2024. Related part numbers may also be used in other Hyundai and Kia models, such as the Sorento XM or Tucson JM.

At Airbag24, we offer expert repair services for this control unit tailored to the following specific model:

Kia: Mohave (HM series, model years 2008–2024)

Due to technical overlaps, it is also relevant to note that related part numbers like 95910-2P580 or 95910-1U100 may exhibit cross‑compatibility with models such as the Hyundai Sorento (XM) or Hyundai Tucson (JM).

How is control unit 95910-2J400 professionally repaired?

At Airbag24, repair of control unit 95910-2J400 follows a standardized process. Upon receipt, the unit undergoes a thorough inspection for all defects; stored crash data is then reset, internal faults are corrected, and defective components are replaced. Final tests ensure full functionality.

The first step involves carefully removing the faulty control unit from the vehicle. A preliminary diagnosis at the workshop helps pinpoint the exact fault and rule out alternative causes.

Once the unit arrives at Airbag24, technicians conduct a detailed analysis, examining not only the reported errors but also known weaknesses associated with this specific part number to prevent future failures.

The actual repair involves erasing the crash data and overhauling the electronics at the component level. Following successful repair, the control unit is tested on a diagnostic bench to verify proper functionality. The unit is returned in “plug-and-play” condition and ready for immediate installation. We provide a 12-month warranty on all repairs.

What shipping options are available?

For repairing your control unit with Airbag24, you can either send it back yourself free of charge or arrange a convenient UPS pickup from your preferred location. Returns are equally flexible, offered via free standard UPS shipping, express delivery, or optionally cash-on-delivery, making the process as simple as possible.

For sending your unit to us, you have two convenient options. You can pack the control unit securely and ship it directly to us, or use our paid UPS pickup service, which collects the package right from your home or workshop.

Once the repair is complete, Airbag24 offers several return‑shipping options tailored to your needs. Standard UPS shipping is provided at no cost.

You can choose between free standard UPS shipping, faster UPS Express for expedited delivery, or both options with cash-on-delivery. Alternatively, personal collection on-site is also available.