What is a Kia Mohave HM airbag control unit?
The Kia Mohave HM airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It monitors sensors, stores crash data, and ensures the proper functioning of all airbag modules in the vehicle, which is critical for safety.
This control unit processes signals from acceleration and crash sensors to deploy the front, side, and curtain airbags when necessary. It is an integral part of the passive safety system in your Kia Mohave HM.
After an accident, the module stores relevant error codes and status information that facilitates diagnosis. A professional Kia Mohave HM airbag control unit repair can reset this data and restore the unit to full functionality.
Why is the Kia Mohave HM airbag control unit defective?
The Kia Mohave HM airbag control unit often fails because crash data is irretrievably stored in internal memory after an accident, preventing the system from restarting. Internal memory errors or communication problems with other vehicle systems can also lead to failure.
Common causes of failure are internal electronic defects that manifest themselves in the EEPROM or memory of the airbag ECU. Such errors prevent the correct monitoring and activation of the safety systems.
A short circuit in connected components or an overvoltage can also damage the airbag control unit. In such cases, a professional diagnosis and subsequent Kia Mohave HM airbag control unit repair is essential.
Common error codes for Kia Mohave HM airbag control unit repair
If a Kia Mohave HM airbag control unit repair is necessary, specific OBD-II B codes are crucial for diagnosing the error. These codes directly indicate problems within the control unit and help the repair shop pinpoint the defect.
- B1000 → Control unit communication error → Signal loss or internal defect of the airbag ECU.
- B1025 → Airbag control unit malfunction → Internal hardware or software error in the control unit itself.
- B1201 → Crash data stored in the control unit → Accident event was detected and stores data that blocks a restart.
- B1345 → Internal memory error in the airbag ECU → Defective memory unit within the control unit.
- B1355 → Passenger airbag resistor circuit short circuit → Problem in the passenger airbag circuit monitored by the control module.
- B1400 → EEPROM / memory error in the airbag control unit → Damage to the non-volatile memory in the control unit.
What part numbers are available for Kia Mohave HM airbag control unit repair?
For a successful Kia Mohave HM airbag control unit repair or replacement, only specific, manufacturer-verified OEM part numbers and those from established suppliers such as Delphi or Bosch are compatible. Using correct part numbers is essential for functionality and safety.
The following part numbers are 100% verified as original airbag control units for the Kia Mohave HM and guarantee compatibility. They come directly from Kia or their trusted original equipment manufacturers.
- 95910-2J400 (Kia OEM)
- 95910-2J450 (Delphi SA3108500-00 / Bosch 0 285 010 018)
- 95910-2J550 (Delphi SA3108600-00 / Bosch 0 285 010 019)
- 95910-2J580 (Kia OEM)
These numbers ensure that the replacement part or repaired module will work seamlessly with your Kia Mohave HM. A professional workshop will know exactly which of these numbers is suitable for your vehicle.
Structure and function of the Kia Mohave HM airbag control unit
The Kia Mohave HM airbag control unit is the heart of the occupant protection system and is usually located in a protected location in the center console or under the dashboard. It features specialized connectors, often yellow-marked, with gold-plated contacts for error-free signal transmission.
The device continuously monitors signals from crash sensors on the front and sides of the vehicle. It evaluates these signals within milliseconds and decides whether to activate the airbags and seatbelt pretensioners.
The airbag module is closely linked to other electronic systems such as ABS, ESC, and TCS. This integration ensures the best possible protection for the occupants in the event of an accident.
The yellow-colored airbag connectors are designed to fit only in one position, ensuring a secure connection. An integrated short-circuit clip also prevents accidental airbag deployment if the connector is disconnected.
Compatibility and variants for the Kia Mohave HM airbag control unit repair
The Kia Mohave HM airbag control unit repair is relevant for models of the SUV from approximately 2008 to the 2016 facelift version, which still use the same basic system. This includes both 3.8-liter V6 gasoline and diesel variants of the Kia Mohave HM.
The control unit is designed to precisely control various airbag types, such as front, side, and curtain airbags. Repairing the module offers a cost-effective alternative to purchasing a new one.
It's important to note that new safety features were introduced after the 2016 model update. These may require adjustments to the control unit, which must be taken into account when repairing later models.