Airbag control unit with part number 95910-2J910

What does the airbag control unit 95910-2J910 do?

The airbag control unit 95910-2J910 is the central control unit of the SRS for Kia. It processes the measurements from the crash sensors and decides in an accident which airbags and seatbelt pretensioners are triggered. After an accident, it stores crash data and locks itself.

The decision is made within milliseconds. At the same time, the unit monitors all connected components and reports faults via the airbag warning light.

Why does the control unit 95910-2J910 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed; a normal diagnostic tool cannot erase it. Aged electronics, cold solder joints, moisture and corrosion on plug connectors, and voltage spikes are also possible causes. Airbag24 erases the crash data during the repair.

If the vehicle has been in an accident, the crash data should therefore be considered first.

The other triggers are technical in nature: electronic components age, solder joints can go cold, and moisture attacks plug contacts. Voltage spikes occur, for example, with a weak battery or after a jump start.

How can you tell that the 95910-2J910 is defective?

The airbag warning light lights up in the instrument cluster permanently or intermittently, an error message is displayed, the diagnostic tool receives no connection to the control unit, or the fault memory cannot be cleared. Airbags and seatbelt pretensioners may then not be able to deploy in an emergency.

The warning light shows the defect itself. A missing connection to the diagnostic tool is also a sign that something in the system is wrong.

As soon as you see the warning light, have the fault memory read out.

Which vehicles is the 95910-2J910 fitted in?

The airbag control unit 95910-2J910 is fitted in these vehicles: Kia Mohave HM (2008-2024). What counts is the control unit with exactly this number, not a device that merely looks similar.

Here follows the overview of the affected vehicles:

• Kia Mohave HM (2008-2024)

If you compare the part number on the label of the removed unit with this page, you are sure you have the right unit. This comparison says nothing about the cause. So have the fault memory read out beforehand, because only the result shows whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-2J400, 95910-2J450, 95910-2J550, 95910-2J580.

How does the repair of the 95910-2J910 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and remove the control unit. Next, create a repair order online and send the unit in, well packed.

Airbag24 checks the unit on the test bench, repairs defective components, erases stored crash data and carries out a function test. Processing usually takes 3–4 working days. After that, your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2J910 get to Airbag24?

You send the unit to Airbag24 as a parcel, or alternatively book a UPS collection for an extra charge. Airbag24 returns the unit via UPS after the repair. Enclose the printed repair order and pack the control unit shockproof.

Stable packaging with enough padding protects the sensitive electronics.