Airbag control unit with part number 95910-2J850

What does the airbag control unit 95910-2J850 do?

As a central unit, the airbag control unit 95910-2J850 controls the restraint system (SRS) for Kia. It checks the signals from the crash sensors and decides within milliseconds in a crash which airbags and seatbelt pretensioners to deploy.

The unit monitors the system constantly and reports faults via the airbag warning light.

After a crash, it stores crash data and locks itself.

Why does the control unit 95910-2J850 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed; a standard diagnostic tool cannot erase it. Other causes include aged components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes.

The other causes at a glance:

• Aged electronic components whose function is declining
• Cold solder joints on the circuit board
• Moisture and corrosion at plug connectors
• Voltage spikes, for example from a weak battery or a jump start

Only the test of the unit shows which cause applies.

How can you tell that the 95910-2J850 is defective?

A defect shows up as the airbag warning light, as error messages in the instrument cluster, and as a diagnostic tool that cannot connect to the control unit.

Pay particular attention to these signs:

• The airbag warning light stays on permanently or intermittently
• An error message appears in the instrument cluster
• The diagnostic tool cannot connect to the control unit
• The fault memory cannot be cleared

In the event of a defect, airbags and seatbelt pretensioners may fail to deploy in an emergency. Have the warning checked promptly.

Which vehicles is the 95910-2J850 fitted in?

The control unit 95910-2J850 is fitted in these vehicles: Kia Mohave HM (2008-2024).

The overview lists the vehicles recorded for this part number:

• Kia Mohave HM (2008-2024)

Compare the part number on the label of the removed unit with this page. This only confirms that you have the right unit. Also have the fault memory read out, because only that result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-2J400, 95910-2J450, 95910-2J550, 95910-2J580.

How does the repair of the 95910-2J850 work?

First, you have the fault memory read out and enclose the log. Then you disconnect the battery, remove the control unit and create a repair order online. Next, you send the unit in, well packaged.

Airbag24 checks the unit on the test bench, repairs defective components, erases stored crash data and carries out a function test. Processing at Airbag24 usually takes 3–4 working days, after which your unit is sent back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2J850 get to Airbag24?

Either you send the unit yourself as a parcel, or you arrange a UPS collection for an extra charge. Airbag24 sends it back to you by UPS after the repair.

Pack the control unit shock-resistant and place the printed repair order inside.