Airbag control unit with part number 95910-2J531

What does the airbag control unit 95910-2J531 do?

The airbag control unit 95910-2J531 controls the airbags and seatbelt pretensioners of Kia. It processes the measurements from the crash sensors and triggers the correct restraint elements within milliseconds in an emergency. After an accident it stores crash data and locks itself.

The electronics check circuits and sensors without interruption. If they detect a fault, they switch on the airbag warning light.

The lock after an accident only ends with the repair.

Why does the control unit 95910-2J531 fail?

Most common cause: crash data stored after an accident, even without a triggered airbag. A normal diagnostic tool cannot erase it. Aged electronics, cold solder joints, moisture and corrosion at plug connections, and voltage spikes are also possible causes.

Crash data remains stored in the unit. Whether an airbag fired makes no difference to these entries.

Aged electronics and cold solder joints can cause faults that keep recurring.

Moisture and corrosion impair the contact at the plug connections. Voltage spikes, for example from a weak battery or after a jump start, stress the electronics.

How can you tell that the 95910-2J531 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently. A fault message in the instrument cluster, a missing connection of the diagnostic tool, and a fault memory that cannot be cleared confirm the suspicion.

Then airbags and seatbelt pretensioners may not fire in a real emergency.

The light shows the defect without you having to look for it. What lies behind it is shown only by reading out the fault memory.

Which vehicles is the 95910-2J531 fitted in?

The 95910-2J531 is fitted in these vehicles: Kia Mohave HM (2008-2024).

The following vehicles are recorded for this number:

• Kia Mohave HM (2008-2024)

Compare the part number on the label of the removed unit with this page. This only shows whether it is the right unit. Have the fault memory read out beforehand, because only this result shows whether the control unit is defective or whether a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-2J400, 95910-2J450, 95910-2J550, 95910-2J580.

How does the repair of the 95910-2J531 work?

First have the fault memory read out and attach the log. Then disconnect the battery and only afterwards remove the control unit. Next create a repair order online and pack the unit well before sending it in.

Airbag24 examines the unit on the test bench, repairs defective components, erases stored crash data and runs a function test. Once complete, you get your own unit back.

Processing at Airbag24 usually takes 3–4 working days.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2J531 get to Airbag24?

Either you send the unit as a parcel, or you book a UPS collection for an extra charge. Airbag24 sends it back by UPS after the repair.

Put the printed repair order into the parcel before you close it.