Airbag control unit with part number 95910-2J580

What is the function of Airbag Control Unit 95910-2J580?

The airbag control unit with part number 95910-2J580 is the central control unit (SRS ECU) for the occupant restraint system in the Kia Mohave HM. It processes signals from crash sensors, deploys airbags and seatbelt pretensioners in the event of a collision, and activates the airbag warning light in case of system malfunctions or after a crash.

This module is specifically designed for the Kia Mohave of the HM series (model years 2008–2024). Its primary task is to continuously monitor all safety‑related components of the airbag system. After an accident, it permanently stores crash data, which results in a safety‑related system lockout.

Technically, it is compatible with related part numbers 95910-2J400, 95910-2J450, and 95910-2J550. Additionally, there is a cross-reference number, 0285011160, indicating its technical compatibility with other systems.

Why does control unit 95910-2J580 fail?

The most common cause of failure is permanently stored crash data following an accident, which triggers a device lockout. These so‑called “hard codes” cannot be cleared using a standard OBD scanner. Similarly, internal electronic defects in components on the circuit board can also lead to control unit failure.

A failure is often triggered by an accident in which airbags or seatbelt pretensioners were activated. The control unit then locks itself for safety reasons. However, this lockout can also occur without any visible accident—such as due to faulty sensors or electrical disturbances.

In addition to stored crash data, purely electronic faults are another frequent cause. These may involve defective memory chips or other components that result in internal errors like fault code B1000 or a complete communication breakdown. Such defects originate at the hardware level and require physical repair.

How do you recognize a defect in 95910-2J580?

A defect in control unit 95910-2J580 primarily manifests as a permanently illuminated or flashing airbag warning light in the instrument cluster. Another clear indication is the lack of communication with the control unit when a workshop attempts to read the fault memory using a diagnostic tool.

The airbag warning lamp typically remains lit even after the engine starts, or begins blinking after a brief self‑test phase of about 30 seconds. This signals a critical error stored within the system.

Another symptom is the failure of all diagnostic attempts. The control unit does not respond to requests via the OBD interface, making it impossible to read or clear fault codes. This points to a severe internal malfunction or a lockout caused by crash data.

In rarer cases, unusual electrical phenomena may also appear, such as a faint glow when locking the vehicle or a constantly illuminated speedometer light, suggesting an internal electronic fault in the airbag control unit.

In which vehicles is control unit 95910-2J580 installed?

The airbag control unit with part number 95910-2J580 is specifically designed for use in the Kia Mohave. It is employed throughout the entire production period of the HM series, from 2008 to 2024, controlling the vehicle’s complete occupant restraint system.

At Airbag24, we repair this control unit for the following model:

Kia: Mohave (HM series, model years 2008–2024)

What are the advantages of repairing 95910-2J580?

Repairing the original control unit offers significant cost savings of up to 70% compared to purchasing an expensive new part, which often costs over €1,000. Since the original component is retained, no complex programming or coding is required in the vehicle, saving time and additional workshop expenses.

A key advantage is preserving the vehicle’s original configuration. The repaired unit is immediately ready for installation (plug-and-play) and functions just like a new part. This restores full functionality of the safety system and avoids compatibility issues that can arise with used parts.

Moreover, repair is a sustainable solution that helps reduce electronic waste. Airbag24 provides a 12‑month warranty on every repair performed, offering added peace of mind.

How is 95910-2J580 professionally repaired?

After being sent to Airbag24, the control unit undergoes a professional repair process. First, an initial inspection is conducted to precisely identify the defect. Next, stored crash data is erased using specialized techniques, and any defective electronic components on the circuit board are replaced before a final functional test confirms successful restoration.

The removal should ideally be performed by a specialized workshop. The control unit is typically located beneath the center console, between the front seats, or under the dashboard. Before removal, it is absolutely essential to disconnect the vehicle battery.

At Airbag24, repairs address the root causes at the component level. This goes far beyond a simple reset and ensures that the device regains its full functionality in accordance with the manufacturer’s specifications. You receive a 12-month warranty on the entire repair service.

What shipping options does Airbag24 offer?

Airbag24 provides flexible and secure shipping options. For the outbound shipment, you can either send the defective control unit yourself at no cost or arrange a convenient UPS pickup at your preferred location. For the return shipment, free standard shipping and faster express shipping are available, both of which can also be selected with cash-on-delivery.

For sending your removed control unit back, you have two options: you can ship it to us at your own expense or use the convenient UPS pickup service, which collects the package directly from your location.

Following successful repair, the return shipment will be handled according to your preferences. You can choose from the following paid and free options:

- UPS Standard Shipping (free)

- UPS Express Shipping

- UPS Standard Shipping with Cash-on-Delivery

- UPS Express Shipping with Cash-on-Delivery

- Self-pickup at our store