Airbag control unit with part number 95910-4D010

What is the function of the airbag control unit 95910-4D010?

The airbag control unit with part number 95910-4D010 is the central control module for the passive safety system in the SsangYong Stavic A100. It continuously analyzes data from acceleration sensors to precisely and promptly deploy the airbags and seatbelt pretensioners in the event of a crash.

As the “brain” of the restraint system, this control unit interprets signals from the crash sensors. Based on this information, it makes split-second decisions about which safety components need to be activated to provide optimal occupant protection.

The unit maintains constant communication with all relevant system components, including front and side airbags, seatbelt pretensioners, and the sensors themselves. Compatible alternative part numbers for this control unit include 95910-4D000, 95910-4D020, 5WK44281, and the Bosch part number 0 285 010 181.

Why does the control unit 95910-4D010 fail?

The most common reason for repairing the control unit 95910-4D010 is the storage of crash data after an accident. Other typical faults include internal errors that cause the warning light to remain illuminated, as well as communication issues with sensors or other safety system components.

Following a collision—even minor ones—the control unit locks its memory and stores so‑called “crash data.” This lock prevents re‑activation and must be professionally reset to restore full functionality. This is by far the most frequent repair request.

In addition to storing crash data, internal malfunctions can also occur. These often manifest as software defects in the unit’s memory or problems within its internal logic, hindering proper operation.

Another issue involves communication with external components. The control unit may lose connection to individual sensors, seatbelt pretensioners, or side airbags, resulting in specific error messages and deactivation of the affected safety circuit.

How do you recognize a fault in the airbag control unit?

A defective airbag control unit 95910-4D010 is primarily indicated by the persistent illumination of the airbag warning light on the instrument panel. Additionally, entries such as “internal error” or “communication error” may appear in the fault memory and cannot be cleared.

The clearest sign is the red airbag warning light that fails to extinguish after the engine starts. This indicates a critical system failure that requires immediate inspection, as no protective functions will be available in an emergency.

During diagnostics at the workshop, it often becomes apparent that the control unit is unresponsive or generates specific error codes. Common entries point to internal hardware or software problems, stored crash data, or communication disruptions with seatbelt pretensioners and side airbags.

These errors cannot be resolved using standard diagnostic tools. The control unit remains locked until the underlying defect is fixed at the electronic level and the device is professionally reset.

In which vehicles is the control unit 95910-4D010 installed?

The airbag control unit with part number 95910-4D010 is specifically designed for SsangYong vehicles. At Airbag24, we repair this control unit for the SsangYong Stavic model A100, manufactured between 2004 and 2013.

We offer repairs for the following model:

SsangYong: Stavic A100 (model years 2004–2013)

The alternative part numbers listed (95910-4D000, 95910-4D020, 5WK44281, 0 285 010 181) are also compatible with these models and can be repaired using the same procedures.

How is the control unit 95910-4D010 professionally repaired?

At Airbag24, the control unit 95910-4D010 undergoes a standardized repair process upon receipt. This includes an initial inspection, correction of the fault by clearing crash data or replacing defective components, followed by a final functional test to ensure full operability.

Once the removed control unit arrives at Airbag24, our technicians perform a detailed diagnosis to pinpoint the exact cause of the malfunction. They read out the fault memory and visually inspect the hardware for any visible or measurable damage.

The actual repair focuses on resolving the identified issue. In most cases, this involves professionally erasing crash data from the memory. For hardware defects, faulty electronic components—such as processors, memory chips, or capacitors—are replaced with high-quality replacements.

Subsequently, the control unit is reset to its factory settings. A final test on our test benches simulates vehicle operation and ensures that the repaired unit functions perfectly—comparable to a brand-new part. We provide a 12-month warranty on every repair.

What shipping options does Airbag24 offer?

Airbag24 offers flexible shipping options for your control unit. You can either send the package yourself at no cost or arrange a paid UPS pickup at your preferred location. Returns are free via UPS Standard, with optional Express and Cash-on-Delivery services. Self-collection is also available.

For the outbound shipment, you have two choices: pack your removed control unit securely and ship it yourself, or take advantage of our convenient UPS pickup service for a fee.

The return shipment of the repaired control unit is free for you via UPS Standard delivery.

If you’re in a hurry, we also offer UPS Express shipping for an additional charge. Both Standard and Express shipping can be arranged with Cash-on-Delivery as an option. Alternatively, upon prior arrangement, you may pick up your device directly from our premises.