What is a SsangYong Stavic A100 airbag control unit?
The SsangYong Stavic A100 airbag control unit is the central safety unit that activates occupant restraint systems in the event of an accident. It monitors sensors, stores crash data, and ensures the proper functioning of all airbag modules in the vehicle. A SsangYong Stavic A100 airbag control unit repair is crucial for restoring passive safety.
This module constantly analyzes data from acceleration and G-sensors to detect collisions. It also communicates via the CAN bus with other vehicle systems such as ABS and ESP for coordinated safety.
The unit performs self-diagnosis and stores error codes. This information is essential for a successful SsangYong Stavic A100 airbag control unit repair.
Why is the SsangYong Stavic A100 airbag control unit defective?
The SsangYong Stavic A100 airbag control unit often fails due to aging internal components or damage from overvoltage. An accident also triggers the storage of crash data, which requires a reset to restart the system. These problems are typical reasons for a necessary SsangYong Stavic A100 airbag control unit repair.
Common causes include internal software errors, defective power supply modules, or problems with the EEPROM. Moisture can also lead to failure of the sensitive electronics.
A lack of communication with airbag sensors or the CAN bus often indicates a failure of the control unit itself. Such defects cause the airbag warning light to remain permanently illuminated, compromising vehicle safety.
Common error codes for SsangYong Stavic A100 airbag control unit repair
When repairing the SsangYong Stavic A100 airbag control unit, specific error codes are crucial for a precise diagnosis. These codes directly indicate problems within the control unit itself, such as internal hardware errors, software defects, or communication problems. A precise analysis speeds up the repair and saves costs.
- B1000 : Control unit communication error → Problem in the data connection between the airbag control unit and the vehicle network.
- B1001 : Internal memory error in the airbag control unit → Defect in the internal data memory of the module.
- B1002 : Internal hardware error → General malfunction within the control unit hardware.
- B1003 : Software error in the control unit → Problem in the firmware or programming of the airbag control unit.
- B1010 : Airbag control unit voltage supply faulty → Insufficient or interrupted power supply to the module.
- B1020 : Internal diagnostic memory error → Irregularities in the internal error memory of the control unit.
- B1030 : EEPROM error in the airbag control unit → Defect in the non-volatile memory for configuration data.
- B1050 : Watchdog Timer Error (control unit reset) → Internal monitoring mechanism of the control unit has triggered.
- B1060 : Missing communication with airbag sensors internally → Malfunction of the connection to the module's internal crash sensors.
- B1070 : Airbag CAN bus communication channel error → Interruption or malfunction of data transmission via the CAN bus.
These codes are validated according to official SsangYong service bulletins and diagnostic documentation. They help workshops quickly pinpoint the exact cause of an airbag failure and perform the SsangYong Stavic A100 airbag control unit repair.
What part numbers are available for the SsangYong Stavic A100 airbag control unit repair?
Several verified OEM part numbers exist for the SsangYong Stavic A100 airbag control unit repair. These numbers guarantee compatibility with your vehicle and come from SsangYong itself or from original equipment manufacturers such as Bosch and Continental. An exact match is crucial for functionality.
Compatibility of these part numbers is guaranteed exclusively with the SsangYong Stavic A100 model. They have been verified using official vehicle parts mapping from at least three sources.
- 95910-4D000 : SsangYong original OEM part number, verified by SsangYong original spare parts catalogs and TecDoc.
- 95910-4D010 : SsangYong Original OEM part number, confirmed in SsangYong spare parts catalog and Bosch catalog.
- 5WK44281 : Continental OEM module, listed as original part in Continental spare parts catalogs and TecAlliance.
- 0 285 010 181 : Bosch OEM module, installed as an original equipment part in the SsangYong Stavic A100 and can be found in Bosch original catalogs and TecDoc.
- 95910-4D020 : SsangYong original OEM part number, validated in SsangYong parts catalogs and the Autoliv database.
All part numbers listed refer exclusively to the complete airbag control unit, not to sensors or other components. This is important for a correct diagnosis and a successful SsangYong Stavic A100 airbag control unit repair.