Airbag control unit with part number 95910-G6510

What does the airbag control unit 95910-G6510 do?

The airbag control unit 95910-G6510 forms the central control unit of the restraint system (SRS) for Kia. It evaluates the signals from the crash sensors and decides within milliseconds in a crash which airbags and seatbelt pretensioners are triggered.

During operation the unit checks the system, and every fault detected is reported via the airbag warning light in the instrument cluster.

After an accident, the control unit stores crash data and then locks itself.

Why does the control unit 95910-G6510 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed, and this data cannot be erased with a normal diagnostic tool. Other causes include aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Airbag24 erases this crash data during the repair, so the statement that it can be erased is consistent with the service.

Electronics age, solder joints can lose contact, and moisture attacks the plugs. Voltage spikes from a weak battery or a jump start also act on the unit.

How can you tell that the 95910-G6510 is defective?

The airbag warning light stays on permanently or intermittently, an error message appears in the instrument cluster, and the diagnostic tool finds no connection to the control unit. The fault memory also cannot be cleared.

• Airbag warning light on permanently or intermittently
• Error message in the instrument cluster
• No connection to the diagnostic tool
• Fault memory cannot be cleared

In an emergency, the airbags and seatbelt pretensioners may not deploy. The warning light shows the defect, so a prompt check makes sense.

Which vehicles is the 95910-G6510 fitted in?

The control unit 95910-G6510 is fitted in these Kia vehicles: Kia Picanto JA (from 2017). The part number on the unit shows whether it fits your own car.

The list names vehicles in which this control unit was installed.

• Kia Picanto JA (from 2017)

Match the part number on the label of the removed unit with this page. This only ensures that it is the correct unit. Have the fault memory read out before removal, because only this result shows whether the control unit is defective or whether a connector or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 1Y84591010, 1Y959-10110, 5WK44333, 93490G3130, 95910-07720, 95910-1Y610.

How does the repair of the 95910-G6510 work?

Have the fault memory read out and attach the log. Then disconnect the battery, and afterwards remove the control unit. Create the repair order online and send the unit in well packed. At Airbag24, testing, repairing and checking usually take 3–4 working days.

Airbag24 checks the unit on the test bench and repairs defective components. Stored crash data is erased, and a function test concludes the work. Your own unit is then returned.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-G6510 get to Airbag24?

You send the control unit as a parcel, or you book a UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Put the printed repair order into the parcel and pack the unit shock-resistant.