What is an Audi A8 D2 airbag control unit?
The Audi A8 D2 airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It precisely monitors sensors, stores important crash data, and ensures the proper functioning of all airbag modules and seatbelt pretensioners in the vehicle to provide maximum safety for the occupants.
This electronic module is crucial for the passive safety of your Audi A8 D2 (model years 1998–2002).
It acts as the brain of the airbag system, processes signals from crash sensors and triggers the required restraint systems within milliseconds.
Why is the Audi A8 D2 airbag control unit defective?
The Audi A8 D2 airbag control unit may be defective because it stores irreversible crash data after an impact or is damaged by internal electronic errors and low voltage. In this case, the airbag warning light will indicate a malfunction, requiring immediate Audi A8 D2 airbag control unit repair to restore safety.
Common causes include age-related wear and tear on components or corrosion on the connections, which can lead to failure.
A defective control unit can impair the functionality of the airbags and belt tensioners or prevent them from being triggered in an emergency, which severely limits vehicle safety.
Common error codes for Audi A8 D2 airbag control unit repair
Common error codes for the Audi A8 D2 airbag control unit indicate problems such as low voltage or internal device errors that require precise diagnosis. A quick error analysis is crucial to identify the cause and initiate the necessary Audi A8 D2 airbag control unit repair to restore the system to full functionality.
These codes are stored in the control unit's error memory and can be read out with a diagnostic tool to determine the exact cause of the fault.
An illuminated airbag warning light always indicates a stored error that requires the airbag system to be checked.
- 1025 → Diagnostic light error → Malfunction of the airbag warning light on the control unit
- 00532 → Supply voltage too low → Insufficient power supply to the airbag control unit
- 00588 → Driver side airbag igniter resistance too high (intermittent) → Problem with communication between control unit and driver airbag igniter
- 0065535 → Airbag control unit defective (ECU cracked) → Internal, serious failure of the control unit itself
What part numbers are available for the Audi A8 D2 airbag control unit repair?
Various OEM part numbers are relevant for Audi A8 D2 airbag control unit repairs, as Audi used different modules depending on the model year and equipment. These numbers, such as 4D0959655H or 0285001309, ensure exact compatibility and are crucial for a successful repair or replacement of the control unit.
The part numbers below are verified original manufacturer or supplier numbers that are directly compatible with the Audi A8 D2 airbag control unit.
Correct identification of the part number is essential to avoid malfunctions after replacement and to ensure full system functionality.
- 4D0959655H → Genuine Audi / Bosch OEM part number for airbag control units of the Audi A8 D2.
- 0285001309 → Bosch OEM supplier number corresponding to Audi part 4D0959655H.
- 4D0959655T → Another genuine Audi / Bosch OEM part number for the airbag control unit of the Audi A8 D2.
- 0285001405 → Bosch OEM supplier number corresponding to Audi part 4D0959655T.
- 8A0959655K → Genuine Audi / Bosch OEM part number, also compatible with airbag control units of the Audi A8 D2.
These specific numbers are validated for the different engines, such as the 3.7L or 4.2L V8, as well as model years of the Audi A8 D2 (1998-2002).
When purchasing a replacement part or ordering an Audi A8 D2 airbag control unit repair, the existing part number on the old part should always be checked to ensure compatibility.