What is a Chevrolet Silverado GMT900 airbag control module?
The Chevrolet Silverado GMT900 airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It monitors sensors, stores crash data, and ensures the proper functioning of all airbag modules in the vehicle to provide maximum safety for the occupants.
It is also called the Sensing Diagnostic Module (SDM) and is crucial for the deployment of airbags and seat belt pretensioners.
This module continuously receives signals from various crash sensors in the vehicle in order to react precisely to a collision.
Why is the Chevrolet Silverado GMT900 airbag control unit defective?
A Chevrolet Silverado GMT900 airbag control module may be defective because it is storing crash data and becoming locked after an accident, or due to internal communication errors caused by an interrupted power supply, which affects the functionality of the entire occupant protection system and requires professional repair.
A defect is often due to an interruption in the power supply, especially on pin 31 (red-white cable) of the control unit.
Internal hardware errors or software corruption can also lead to module failure.
After an accident, the control unit stores accident data and must be reset or replaced to function again.
Common error codes for Chevrolet Silverado GMT900 airbag control unit repair
During Chevrolet Silverado GMT900 airbag control unit repairs, specific error codes often occur. These indicate communication problems with the control unit itself or a missing configuration after replacement. A precise diagnosis using specialized tools is essential to identify the cause.
- B1000 : Control Module Communication Error – This indicates problems with the airbag module’s data transmission, often caused by power supply interruptions.
- B0100 : Configuration Mismatch Error – This code indicates that the SDM was not correctly matched to the vehicle VIN, typically after a module replacement without programming.
Other error codes related to sensors or belt pretensioners are generally not directly attributable to the control unit itself.
What part numbers are available for the Chevrolet Silverado GMT900 airbag control unit repair?
Several verified part numbers are relevant for the Chevrolet Silverado GMT900 airbag control unit repair, including the original GM part number as well as compatible OEM supplier numbers from Autoliv and Bosch. These numbers ensure correct fit and function for your vehicle model, which is crucial for a successful repair.
The primary and 100% verified GM OEM part number for the Chevrolet Silverado GMT900 airbag control module is 13521217 .
Additionally, OEM part numbers 20982474 from Autoliv and 25816951 from Bosch/Autoliv are confirmed as compatible spare parts.
These part numbers are industry standard and listed in professional parts catalogs for the GMT900 platform.
Where is the Chevrolet Silverado GMT900 airbag control unit installed and how does it work?
The Chevrolet Silverado GMT900 airbag control unit is typically located in the center tunnel or under the seat, protected from environmental influences. It continuously monitors sensors, makes decisions about airbag deployment in milliseconds, and stores important accident data to ensure occupant safety in an emergency.
Installation requires correct electrical connection, with the power and ignition pins (pins 31 and 32) being particularly critical.
After installation, the control unit must be adapted to the vehicle VIN and reconfigured using a GM-specific diagnostic tool.
This VIN-specific programming is essential to avoid error codes like B0100 and to ensure full functionality of the system.