Chrysler 200 1st Gen Airbag Control Unit Repair

Select repair type

Regular price €65,00
Sale price €65,00 Regular price
Tax included.

Possible airbag error codes for this car:

Chrysler 200 1st Gen Airbag Control Unit Repair bei Airbag24

Airbag24 repariert defekte Airbag-Steuergeräte professionell und kostengünstig. Sowohl Privatkunden als auch Werkstätten können ohne Anmeldung bestellen und von schneller Bearbeitung, 2 Jahren Garantie und Plug&Play-Installation profitieren.

Airbag24 arbeitet mit modernster Diagnosetechnik und spezialisierten Reparaturverfahren. Weil defekte Steuergeräte oft nur einzelne Komponenten betreffen, kann eine professionelle Überholung deutlich günstiger als ein Neukauf sein.

Unsere Vorteile: Keine Anmeldung erforderlich, direkter Online-Bestellprozess für B2B und B2C Kunden, express Versand und umfassende Qualitätsprüfung. Das reparierte Steuergerät funktioniert wie ein Neuteil.

Part number of the control units in this car

Possible error codes

Notes

If it is determined that the control unit is not defective, only a flat-rate test fee will be charged

What is a Chrysler 200 1st Gen airbag control module?

The Chrysler 200 1st Gen airbag control module, also known as the occupant restraint controller (ORC), is the vehicle's central electronic safety unit. It continuously monitors all impact sensors and occupant detection systems to precisely deploy airbags and seatbelt pretensioners in the event of a crash. This module is critical to passive safety.

This SRS (Supplemental Restraint System) module serves as the command center for the entire occupant protection system. It collects and processes data from various sensors in the vehicle, ensuring a rapid and appropriate response in emergency situations.

The control unit operates on 12V on-board voltage and is integrated via the vehicle's CAN bus system. This enables real-time communication and diagnostics of the safety components. Each module is programmed to the vehicle's VIN and must be recoded if replaced.

Why is the Chrysler 200 1st Gen airbag control unit defective?

The Chrysler 200 1st Gen airbag control unit often fails because it stores crash data after an accident and then activates an airbag warning light. Moisture damage, internal component failure, or power supply issues can also cause failure, requiring professional repair.

A common cause of failure is the storage of crash events. After the airbags or seatbelt pretensioners are deployed, the module blocks further functions for safety reasons. This requires a reset or **repair**.

Internal circuit defects or overvoltages can also damage the control unit. This leads to malfunctions or a complete **failure** of the system. Such damage renders the module **defective** and requires professional repair.

Connection problems with the module or the associated sensors, such as those with seat occupancy mats, can trigger the error message. A professional **diagnosis** is essential for **repair** to determine the exact cause.

Common error codes for Chrysler 200 1st Gen airbag control unit repair

During Chrysler 200 1st Gen airbag control unit repairs, specific error codes occur that point directly to the control unit. These codes indicate problems with internal communication, airbag deployment loops, or general diagnostic errors that require targeted repair.

  • B1000 → Control unit communication error → The airbag control unit cannot communicate with other vehicle systems.
  • B0020-13 → Left Side Deployment Loop Error → Problems in the left airbag or seatbelt pretensioner circuit detected by the control unit.
  • B0028-13 → Right Side Deployment Loop Error → Problems in the right airbag or seatbelt pretensioner circuit reported by the control unit.
  • B1C14 → Airbag control unit error (often seat conductor/connection) → The module registers an internal or connection-related **error**, often related to seat occupancy.
  • B2208 → Airbag control unit diagnostic error / control unit error → There is a general internal defect or malfunction of the airbag control unit, which requires replacement or **repair**.

What part numbers are available for Chrysler 200 1st Gen airbag control unit repair?

For Chrysler 200 1st Gen airbag control module repair, there are several verified OEM part numbers, all of which refer to the original Occupant Restraint Module (ORM) for this model. These numbers may vary depending on the year of manufacture and specific vehicle configuration and also include officially confirmed supersessions.

The compatibility of an airbag control unit is crucial for safety. Precise identification based on the part number is therefore essential. Only the correct part number ensures correct function after repair.

Many of these numbers are known as "supersessions." This means that newer numbers replace older ones, but are functionally identical. A qualified repair shop can reliably identify these relationships.

The numbers listed here have been validated by multiple independent and trusted sources. This ensures a 100% fit for your Chrysler 200 1st Gen model and a successful repair.

  • 68264878AA
  • P68186184AC
  • 68186184AD, 68186184AC, 68186184AB
  • 68148054AC, 68148054AB
  • 56054966AA, 56054966AB
  • 68186186AC, 68186186AB, 68155747AB, 68155747AC, 68186186AA
  • 68186180AD

Didn't find your car? We can probably still help!