What is a Daihatsu Move L600 airbag control unit?
The Daihatsu Move L600 airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It monitors sensors, stores crash data, and ensures the proper functioning of all airbag modules in the vehicle, making it essential for occupant protection.
This electronic control unit, often referred to as the airbag ECU, continuously receives data from impact and acceleration sensors. Based on this information, it decides on the lightning-fast deployment of the airbags and seatbelt pretensioners.
Why is the Daihatsu Move L600 airbag control unit defective?
The Daihatsu Move L600 airbag control unit often malfunctions because it stores crash data after an accident or develops an internal error that blocks system function. These conditions typically require a special repair or reset to restore the control unit to full functionality.
Because the control unit records crash data after an accident, it locks itself to prevent accidental deployment. The airbag warning light then illuminates continuously, signaling a system error.
An internal failure of the control unit can also cause the airbag system to malfunction. Such internal errors require a precise diagnosis and often professional repair of the module.
The repair typically involves erasing crash data and correcting internal errors to restore the Daihatsu Move L600 airbag control unit to operational status. A workshop can provide a precise diagnosis.
Common error codes for Daihatsu Move L600 airbag control unit repair
Specific manufacturer-specific trouble codes for the Daihatsu Move L600 airbag control unit (89170-B2C20) are not publicly documented, however, generic conditions such as "Crash Data Stored" or "Internal Fault" often occur, requiring a reset or repair.
- B1200 → Crash data stored → Deployment of airbags or belt tensioners after an accident requires a system reset.
- B1000 → Control unit communication error → Interruption of data transmission between airbag ECU and other vehicle systems, which requires diagnosis.
- B1100 → Internal memory error → Defects in the internal data memory of the airbag control unit that require professional repair.
- B1300 → Internal control module status error → General malfunction within the airbag module electronics that affects system reliability.
What part numbers are available for the Daihatsu Move L600 airbag control unit repair?
For the Daihatsu Move L600 airbag control unit, the only 100% verified OEM part number is 89170-B2C20 from the manufacturer Daihatsu. Currently, no other official or alternative supplier numbers are publicly confirmed, which simplifies accurate part identification.
Part number 89170-B2C20 is the officially used OEM number for the airbag control unit in the Daihatsu Move L600. This is specifically relevant for the airbag control units in this series.
This number has been verified from professional airbag module repair quotes related to the Daihatsu Move airbag control unit [1]. Other supplier or alternative numbers are currently unconfirmed.
For maximum safety before a Daihatsu Move L600 airbag control unit repair, a precise parts comparison should always be performed using the vehicle identification number (VIN). This can be done at an official spare parts dealer or a specialized workshop.