What is a Daihatsu Move L900 airbag control unit?
The Daihatsu Move L900 airbag control unit is the central safety unit in your vehicle, crucial for protecting occupants in the event of a collision. It continuously monitors sensors, interprets impact data, and reliably deploys airbags and seatbelt pretensioners in an emergency to ensure maximum safety.
This control unit is a safety-relevant component that controls the entire airbag system logic. It processes signals from various sensors to assess the severity of an impact.
Proper function is essential for safety, which is why a Daihatsu Move L900 airbag control unit repair is essential in the event of a fault. It ensures that the airbags are activated at the right time and with the correct intensity.
Why is the Daihatsu Move L900 airbag control unit defective?
A Daihatsu Move L900 airbag control unit may be defective because crash data was stored after an accident, preventing it from operating. Other common causes include internal hardware errors, EEPROM defects, or communication problems, which require a professional Daihatsu Move L900 airbag control unit repair .
Because crash data is stored in the control unit after an accident, it often needs to be reset to ensure full functionality. Without a reset, the airbag system remains inactive.
A failure can also be caused by internal diagnostic errors or problems in the airbag system's firing circuit. Such defects impair the vehicle's entire safety function and require prompt repair.
Common error codes for Daihatsu Move L900 airbag control unit repair
Specific OEM error codes for Daihatsu Move L900 airbag control unit repairs are often not publicly listed. However, common B-codes indicate typical internal control unit errors, such as communication problems or memory issues, that require a reset or repair of the module.
- B1000 → Control unit communication error → Faulty internal communication of the airbag ECU.
- B1001 → Self-test failed → The control unit could not successfully complete the internal system test.
- B1002 → Internal memory error → Problems reading or writing data in the control unit.
- B1003 → EEPROM read/write error → Defects in the non-volatile memory of the airbag module.
- B1010 → Airbag ignition circuit error → Malfunction in the airbag deployment circuit.
- B1011 → Internal sensor malfunction → A sensor integrated in the control unit is malfunctioning.
- B1020 → Internal diagnostic error → The control unit has detected a problem with its own diagnostic software.
- B1210 → CAN bus communication error → Malfunction in the data transmission via the CAN bus to the control unit.
What part numbers are available for the Daihatsu Move L900 airbag control unit repair?
For the Daihatsu Move L900 airbag control unit repair , the only verified and exact OEM part number is 89170-B2C20. No other alternative or supplier part numbers for this specific airbag control unit have been confirmed in official catalogs, which underscores its uniqueness.
Part number 89170-B2C20 is validated exclusively for the airbag control unit of the Daihatsu Move L900. This number is crucial for correct identification during any repair or replacement.
A careful check of the part number is essential when repairing the Daihatsu Move L900 airbag control unit to ensure compatibility and functionality. Confusion with other components is eliminated.
Currently, no other replacement or alternative numbers with a 100% match are known. This emphasizes the importance of using the original OEM number for this Daihatsu Move L900 model.