What is a Dodge Intrepid 1st Gen airbag control module?
The Dodge Intrepid 1st Gen airbag control unit is your vehicle's central safety unit, activating all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It continuously monitors sensors, stores important crash data, and ensures the proper functioning of all safety equipment for your Dodge Intrepid 1st Gen airbag control unit repair.
This electronic control unit, also called the SRS Control Module, is responsible for the precise control of airbag deployment.
It processes data from crash sensors and seat occupancy sensors to respond quickly and safely in an emergency.
Why is the Dodge Intrepid 1st Gen airbag control module defective?
The Dodge Intrepid 1st Gen airbag control module can fail due to crash data storage issues, internal memory errors, or an out-of-range voltage supply, requiring specialized Dodge Intrepid 1st Gen airbag control module repair. Such defects significantly impact vehicle safety and require immediate diagnosis.
After an airbag is deployed, the control unit stores indelible crash data, which makes it necessary to reset or replace it.
Internal component failures or damage to the circuit board can also cause the module to break and the airbag warning light to illuminate.
Problems with the vehicle electrical system voltage or communication errors in the vehicle bus can also cause the control unit to fail.
Common error codes for Dodge Intrepid 1st Gen airbag control unit repair
During a Dodge Intrepid 1st Gen airbag control unit repair, error codes such as B1000 (communication error), B1001 (internal memory error), or B1002 (voltage supply problem) are typically read, which indicate internal problems with the airbag ECU. These codes indicate a defective condition within the control unit itself and are crucial for diagnosis.
- B1000 → Control unit communication error → The airbag ECU cannot communicate correctly with other systems.
- B1001 → Internal memory error in the control unit → There is a problem with the non-volatile memory of the airbag module.
- B1002 → Voltage supply in the control unit is outside the permissible range → The power supply to the airbag ECU is unstable or incorrect.
- B1003 → Internal diagnostic error of the control unit → The airbag module failed an internal self-test.
- B1010 → Control unit self-test failed → The internal system check of the airbag ECU revealed an error.
- B1020 → EEPROM memory error in the control unit → A specific error in the EEPROM memory of the airbag control unit was detected.
- U1000 → Communication error between control units → The airbag ECU cannot communicate with other control units in the vehicle network.
- U1010 → Bus communication interruption → An interruption in the communication bus to the airbag control unit has occurred.
What part numbers are available for the Dodge Intrepid 1st Gen airbag control unit repair?
For Dodge Intrepid 1st Gen airbag control unit repair, the only verified, genuine OEM part number for the airbag control unit is 04759012AI, which specifically designates the SRS-ECU (Occupant Restraint Controller). This number is crucial for correctly sourcing or repairing the control unit and avoiding errors in parts selection.
Part number 04759012AI identifies the original Chrysler/Mopar airbag control module for the 1st generation Dodge Intrepid.
Other Mopar numbers, such as 0MF50DX9BB, refer to airbag cushions and not the control unit itself.
When repairing the Dodge Intrepid 1st Gen airbag control unit, it is important to note the exact number, as this is the only way to identify the specific control unit and an incorrect part cannot guarantee functionality.