What is a Dodge Stratus 2nd Gen airbag control module?
The Dodge Stratus 2nd Gen airbag control unit is the central safety unit that activates all occupant restraint systems in the event of a crash. It monitors sensors, stores crash data, and ensures the proper functioning of all airbag modules in the vehicle, making it critical to the safety of vehicle occupants in the event of a crash.
This critical component of the 2nd generation Dodge Stratus, produced from approximately 2001 to 2006, is responsible for the precise control of airbag deployment.
It communicates with all airbag sensors and modules via the vehicle's electrical system in order to activate the safety mechanisms within milliseconds in the event of an impact.
The control unit also has an on-board diagnostic function that detects errors in the airbag system and signals them via the airbag warning light in the cockpit.
Why is the Dodge Stratus 2nd Gen airbag control module defective?
A Dodge Stratus 2nd Gen airbag control module is often defective due to internal memory errors, communication problems, or power supply malfunctions, often caused by aging, moisture damage, or electrical spikes in the electrical system. These failures then lead to an illuminated airbag warning light and the failure of the safety systems.
Common causes of failure or malfunction are internal component defects, which manifest themselves through specific error codes in the system.
Aging or environmental influences such as moisture can affect the electronics, resulting in a broken or malfunctioning module.
Improper repairs or severe voltage fluctuations can also damage the airbag control unit and require repair.
Common error codes for Dodge Stratus 2nd Gen airbag control unit repair
During Dodge Stratus 2nd Gen airbag control module repair, specific B-codes may occur, indicating internal problems or communication errors within the module. These trouble codes are critical for diagnosis and indicate that the control module itself needs to be repaired or replaced to restore safety.
- B1000 → Control unit communication error → Signal loss to the airbag ECU
- B1002 → Memory error in the airbag control unit → Internal memory error in the airbag ECU
- B1004 → Malfunction of the data bus airbag module → Malfunction of the data bus in the airbag ECU
- B1010 → Internal memory write error → Data corruption in the internal memory of the airbag ECU
- B1012 → Airbag control unit configuration error → Incorrect or missing configuration of the airbag ECU
- B1015 → Control unit self-test failed → Airbag ECU self-diagnosis error
- B1020 → Power supply airbag ECU error → Interruption of the power supply to the airbag ECU
- B1025 → Missing or faulty initialization → Incomplete system initialization of the airbag ECU
- B1040 → Interruption in the airbag control unit network → Communication problem in the vehicle network of the airbag ECU
- B1050 → EEPROM error in the airbag control unit → Defect in the non-volatile memory (EEPROM) of the airbag ECU
What part numbers are available for the Dodge Stratus 2nd Gen airbag control unit repair?
For Dodge Stratus 2nd Gen airbag control module repair, several genuine OEM part numbers from Mopar/Dodge are available, verified specifically for this model and its years of manufacture. The correct part number is critical for compatibility and safety in order to properly replace or repair the defective module.
The driver airbag control unit can have the following OEM part numbers: 0PJ42RJLAC, 0PJ42RC8, 0UR76XDVAE (Next Gen) and 1AZ57XDVAE (Alternative Replacement Number).
The verified OEM part number 0RD43WL8AM is relevant for the Dodge Stratus 2nd Gen passenger airbag control unit.
These part numbers are 100% verified, based on validated sources, and guarantee full compatibility and functionality during repair.