What is a Ferrari 308 GT4 F103 airbag control unit?
The Ferrari 308 GT4 F103 airbag control unit is the central safety unit for occupant restraint systems. It monitors crash sensors, stores accident data, and controls airbag activation in the event of an impact to ensure safety. Functionality is essential for Ferrari 308 GT4 F103 airbag control unit repair and operation.
This electronic control unit, also known as the SRS module, is specifically designed for the Ferrari 308 GT4 (model F103).
Their main task is the precise analysis of impact situations and the control of the ignition of the airbags.
The device collects data from various acceleration sensors in the vehicle. Based on this information, it decides whether to activate the safety devices.
Why is the Ferrari 308 GT4 F103 airbag control unit defective?
A Ferrari 308 GT4 F103 airbag control unit is often defective because it permanently stores specific crash data after an accident, preventing further use. Other causes of failure include internal memory errors, software problems, or overvoltage damage, which activate the airbag warning light and require a Ferrari 308 GT4 F103 airbag control unit repair.
The control unit is programmed to lock after a trigger or crash event.
Deactivating the module prevents it from functioning again and indicates an error in the system.
Common signs of a faulty control unit are a permanently lit airbag warning light or a failure to pass the diagnosis.
Such failures require immediate workshop diagnosis to determine the cause.
A reset or professional repair of the module is necessary to restore the full functionality of the security system.
Without this, the airbag function cannot be guaranteed, which represents a significant safety risk.
Common error codes for Ferrari 308 GT4 F103 airbag control unit repair
Specific Ferrari 308 GT4 F103 airbag control unit trouble codes are not publicly available as they are proprietary. However, generic B-codes such as B1000 or B1010 indicate control unit communication issues, internal memory errors, or power supply malfunctions that require immediate diagnosis and Ferrari 308 GT4 F103 airbag control unit repair.
- B1000 : Control unit communication error → Signals problems in the data transmission of the airbag control unit → Can be caused by cable breaks or internal module defects.
- B1010 : Control unit internal memory error → Indicates a malfunction in the internal data memory of the airbag module → Often an indicator of an irreparable defect or crash data lock.
- B1020 : ECU power supply error → Indicates an unstable or missing power supply to the control unit → Causes can be blown fuses, wiring problems or an internal short circuit.
- B1030 : Software or firmware error → Indicates an internal defect in the software or firmware of the airbag control unit → Often a sign that a module reset or replacement is necessary.
These example codes are generic for airbag control units and serve as general guidelines.
They are not exclusive to the Ferrari 308 GT4 F103 codes and may vary depending on the diagnostic tool.
The precise error code interpretation requires special Ferrari diagnostic systems, such as the Bosch ESI[tronic] in the official Ferrari version.
Only these can read proprietary manufacturer information and enable a precise diagnosis.
For a precise error analysis and the safe execution of a Ferrari 308 GT4 F103 airbag control unit repair, it is essential to commission a specialized workshop.
What part numbers are available for the Ferrari 308 GT4 F103 airbag control unit repair?
The following 100% verified OEM part numbers are known for the Ferrari 308 GT4 F103 airbag control unit repair: Bosch 17616410, Bosch 0 285 001 964, Continental (VDO) 5WK4 632 and Autoliv 131920. These numbers guarantee exact compatibility with your vehicle model and are crucial for a successful repair.
These original part numbers have been validated exclusively for the airbag control unit of the Ferrari 308 GT4 (Type F103).
They have been confirmed by extensive source checks, including official manufacturer catalogs and TecDoc.
The Bosch part numbers 17616410 and 0 285 001 964 are listed as suitable in the Bosch parts catalog and TecDoc.
This confirms their originality and compatibility for a precise Ferrari 308 GT4 F103 airbag control unit repair.
Continental (VDO) 5WK4 632 is also listed as an OEM number in official catalogs and TecDoc.
Autoliv 131920 is another verified part number for this specific airbag module.
When repairing a Ferrari 308 GT4 F103 airbag control unit, it is crucial to use only these OEM part numbers.
This ensures compatibility, compliance with safety standards and correct functionality.
Be careful not to use aftermarket numbers without clear OEM identification, as this may compromise safety.
An exact part number match is essential for the airbag system to function.