What is a Ford Tourneo Connect Mk1 airbag control unit?
The Ford Tourneo Connect Mk1 airbag control unit is the central safety unit in the vehicle, which activates the life-saving airbags and seatbelt pretensioners after a collision. It continuously monitors the sensors, stores relevant crash data, and is essential for the correct functioning of all occupant restraint systems in the Ford Tourneo Connect Mk1.
This electronic module is the brain of the passive safety system. It receives signals from acceleration sensors and decides whether to activate within milliseconds. Proper functioning is crucial for occupant safety.
Why is the Ford Tourneo Connect Mk1 airbag control unit faulty?
The Ford Tourneo Connect Mk1 airbag control unit often fails because crash data is permanently stored after an accident, which activates the airbag warning light and disables the system. Internal software errors, communication problems, or a sudden failure can also impair the function of the airbag control unit, necessitating repair or replacement.
A common cause of a defect is the storage of crash data after a collision, even in minor impacts. This data blocks the system, preventing the airbags from deploying again, and the warning light on the dashboard illuminates.
In addition, internal errors in the control unit's microprocessor or power supply issues can lead to failure. Communication problems with other vehicle systems are also a possible cause of a defective condition. Therefore, diagnosis with specialized workshop equipment is crucial.
Common error codes for Ford Tourneo Connect Mk1 airbag control unit repair
When diagnosing a faulty Ford Tourneo Connect Mk1 airbag control unit, specific trouble codes may occur, indicating communication issues or stored crash data. These codes are crucial for precise Ford Tourneo Connect Mk1 airbag control unit repair and help identify the exact cause of the problem.
- B1000 → Control unit communication error → Interruption of data transmission or internal error
- B1193 → Crash data stored in the Restraint Control Module → Accident event was detected and stored in the memory
- U2017 → Communication error between airbag control unit and other vehicle systems → Malfunction in the vehicle's CAN bus network
- U3000 → Control unit failure or general error → Internal defect or serious malfunction of the module
What part numbers are available for the Ford Tourneo Connect Mk1 airbag control unit repair?
For the Ford Tourneo Connect Mk1 airbag control unit repair, several verified OEM part numbers are relevant. These are from Ford or its supplier Bosch and ensure full compatibility. These numbers are crucial for finding the correct replacement part and ensuring the safe operation of the airbag system.
- 9T1T14B321BD (Bosch; Original OEM)
- KT1T14B321KD (Bosch; Original OEM)
- 7T11-12A650-AF (Ford; Original OEM)
- 6C1T14B056AE (Ford; Original OEM)
These part numbers identify the exact airbag control units installed in the Ford Tourneo Connect Mk1 and similar models such as the Transit Connect Mk1. A matching part number is essential for successful repair and compatibility.
Technical specifications and compatibility of the Ford Tourneo Connect Mk1 airbag control unit
The Ford Tourneo Connect Mk1 airbag control unit is a 12V system, often manufactured by Bosch, and controls all airbag and seatbelt pretensioner systems in first-generation models (approximately 2002-2013). Its specifications are tailored to the vehicle to enable precise activation and diagnostics.
The airbag control unit acts as the central control unit for occupant safety. It continuously monitors all connected sensors and is responsible for the lightning-fast deployment of the airbags and seatbelt pretensioners in the event of an impact.
It is specifically designed for the Ford Tourneo Connect Mk1 and Transit Connect Mk1 (model years 2002-2013). Models with engines such as the 1.8 Turbo DI are typical applications for this generation of control units.
The module features multi-pin connectors for communication with the vehicle network and the airbag modules. It also stores relevant diagnostic data and error codes for workshop analysis.
Installation and professional Ford Tourneo Connect Mk1 airbag control unit repair
Repairing the Ford Tourneo Connect Mk1 airbag control unit requires professional installation and often subsequent reprogramming, as the module is safety-critical and contains VIN-specific data. Its positioning in the vehicle interior, usually under the center console, protects it from external influences.
The airbag control unit is usually installed in the center tunnel or under the center console. This location provides protection from moisture and vibrations, but is often only accessible with specialized tools.
After replacement or repair, the airbag control unit must be recoded or reprogrammed. This is necessary to adapt it to the specific vehicle identification number (VIN) and restore the full functionality of the safety system.
Due to the high safety relevance and legal regulations (Explosives Act), repairs and installation should only be carried out by certified specialist workshops. To avoid danger, laypersons should never attempt to repair or replace the module themselves.